Bohler-Uddeholm Showroom


Tool Steels

Worldwide producer of tool steels and specialty materials for metalforming, plastic molding, die casting and extrusion. Manufacturing steel mills are located in Sweden, Austria, Germany and Brazil. We provide PVD coatings through eifeler Coatings Technology (

Recent Content on for Bohler-Uddeholm

April 6, 2016
Bohler-Uddeholm, eifeler Coatings Technology open joint service/coating center
The new joint Bohler-Uddeholm Service Center and eifeler Coatings Technology PVD Coating Center has opened in Middleburg Heights, Ohio. Tooling...
February 23, 2016
Böhler-Uddeholm to host March 10 heat-treatment webinar
Böhler-Uddeholm has announced it will present the webinar “The 10 Keys to Good Heat Treatment” on March 10, 2016, at 2:00 p.m. EST. Joe...
December 2, 2015
Bohler-Uddeholm names Illinois sales rep
Elgin, Ill.-based Bohler-Uddeholm, a manufacturer of tooling materials suitable for metal forming and stamping dies, has named Kevin Dumont as sales...
August 26, 2015
Böhler-Uddeholm hires sales representative
Böhler-Uddeholm, Elgin, Ill., a manufacturer of tooling for metal forming and stamping dies, has named Ayse Hoops as sales representative based in...
August 10, 2015
Böhler-Uddeholm names regional manager
Böhler-Uddeholm, Elgin, Ill., a manufacturer of tooling materials for metal forming and stamping dies, has appointed Jeff Albee as region east...
April 1, 2015
Improving the performance of transfer dies
The use of high-strength work materials has dramatically increased the performance requirements on the stamping and forming tools. The selection of the proper tool steel grade at each transfer die station plays a large role in optimizing productivity. The tooling’s performance may be enhanced further with the addition of a coating.
May 21, 2013
Böhler-Uddeholm opens PVD coating center in Ontario
Böhler-Uddeholm has opened a new PVD coating facility at the Thermo-Tech thermal processing location in Mississauga, Ont. The 9,000-sq.-ft. service...
June 28, 2012
Bohler-Uddeholm adds edge wire capacity
Bohler-Uddeholm Corp., Elgin, Ill., has announced the expansion of the high-speed-steel edge wire capacity at its South Boston, Va., manufacturing...
December 11, 2007
Tooling for forming high-strength material
The demands are increasing for forming with higher-strength work materials, particularly for automotive applications because of their lighter weights. It can be a challenge to find a tool steel material that does not chip, crack, or wear when used on high-strength steels. This article compares various tool steel materials and how they stand up to the challenge.
August 9, 2005
The science of steel
The spray form process is a new manufacturing technique that offers high alloyed tool steel with uniform carbide size and uniform carbide distribution. With less processing steps than P/M and properties better than ingot cast tool steel, SF is an option that offers nearly P/M performance with a cost closer to ingot casting.
2505 Millennium Drive
Elgin, IL 60124

Phone: (800) 638-2520
Fax: (630) 883-3101

Connect with Bohler-Uddeholm



Job Shop Services
Service Center
Tool and Die
Tool Steel

Related Buyers' Guides

Service Center Directory