DCM Tech Inc.
Extend tool life with the DCM Punch and Die Grinder
DCM Tech will be displaying the new Mini Punch and Die Grinder at FABTECH '09. This economical alternative to the long standing DCM PDG Punch and Die Grinder produces similar results on a lower cost platform. The Mini tool sharpening package provides rotary grinding efficiency to smaller shops with a lower volume tool sharpening needs. Over manual swingarm grinders and reciprocating surface grinders, the wet, rotary table, vertical spindle DCM machine configuration grinds 5-10 times faster without burning valuable tooling. Save on labor, replacement tooling and deburring costs with a DCM rotary punch and die grinder.
4455 Theurer Blvd.
Winona, MN 55987
Phone: 507-452-4043
Fax: 507-452-7970
Sales Contact
Mike Anderson
Product Manager
Email: interest@dcm-tech.com
Recent Content on The Fabricator for DCM Tech Inc.
-
- From The Fabricator
Rotary surface grinders integrate with third-party robotic arms
DCM Tech has redesigned its IG 82 series rotary surface grinders to include discrete digital inputs and outputs for connection to almost any third-party robotic arm for loading/unloading parts and clearing away debris.
-
- From The Fabricator
Sharpen your punch tooling maintenance program
Sharpening punch tooling consistently and correctly can help a fabricator save time and money in its punching operations. These suggestions can help a fabricator determine if the company is efficient as it can be with its maintenance program for punch tooling.
-
- From The Fabricator
With fixture enhancements, grinder sharpens punches, dies up to 8 in.
DCM Tech Inc. offers the model PDG punch and die grinder for sharpening turret press tooling, progressive dies, and small die sets. Standard center-mounted rotary fixturing holds punches and dies up to 6.25 in. in diameter with fixture enhancements available to sharpen dies up to 8 in. The punch...
-
- From The Fabricator
Punch, die grinder designed for in-cell tooling maintenance
The Mini punch and die grinder from DCM Tech is a small, vertical spindle rotary table surface grinder. It is designed for in-cell tooling maintenance on turret and punch press cells to sharpen rooftop, shear angle, thick- and thin-turret, progressive, die, and small punch press tooling....
-
- From The Fabricator
Better tool management, better punching
McQuay international develops a strategy to prolong tool life for turret presses.
-
- From The Fabricator
Nothing standard about this fab shop
Rob Marelli left a family-owned metal fabricating company four years ago with the intention of doing things his way. Joined by a loyal group of managers and employees, he's found success at Seconn Fabrication. In the short time the company has been open, it has earned revenues of $9 million. And the company has done this by doing things other metal fabricating competitors aren't.