Delcam / FeatureCAM
275 E. South Temple
Suite 305
Salt Lake City, UT 84111
Phone: 877-DEL-CAM1
Fax: 801-575-5017
Recent Content on The Fabricator for Delcam / FeatureCAM
-
- From The Fabricator
Delcam adds more than 80 technical tips to website
Delcam has created a section for technical tips on the website for its FeatureCAM feature-based programming software. More than 80 tips are listed in the new section, which is located at www.featurecam.com/techtips/. The tips aim to help users with all aspects of programming with FeatureCAM,...
-
- From The Fabricator
Delcam donates more than 1,000 Delcam University courses to SkillsUSA
Delcam has donated more than 1,000 Delcam University courses, with a total value close to $300,000, to SkillsUSA. The organization serves teachers and high school and college students who are preparing for careers in technical, skilled, and service occupations. SkillsUSA programs also help to...
-
- From The Fabricator
Simulation tools added to CAM software
Delcam offers the 2014 R2 version of its PowerMill CAM software for high-speed and 5-axis machining. Simulation and customization tools have been added, and editing flexibility has been increased. The ordering of the Vortex tool paths, the software’s high-efficiency area-clearance strategy,...
-
- From The Fabricator
Autodesk to acquire Delcam
Autodesk has announced its intention to acquire Delcam, a supplier of manufacturing software based in Birmingham, U.K. Delcam has more than 30 offices worldwide and approximately 700 employees. The company’s design, manufacturing, and inspection software provides automated CAD/CAM for industries...
-
- From The Fabricator
Delcam acquires CAD CAM Systems to form Illinois office
Delcam has established a direct office in Illinois following its acquisition of its Rockford-based reseller, CAD CAM Systems Inc. CAD CAM Systems President Andy Bergstrom and the company’s staff have become direct employees of Delcam North America. This is the company's sixth direct office in...
-
- From The Fabricator
New milling process uses trochoidal machining strategies
Delcam's PowerMILL software for five-axis machining is being used to program a novel machining method for the creation of "fir-tree" profiles in components for turbo machinery without the need for special broaching equipment. The milling process, which is based on the trochoidal machining...
-
- From The Fabricator
Inspection software released in dual-column version
Delcam has introduced a dual-column version of PowerINSPECT inspection software. The combination of a dual-column CMM and the software allows the simultaneous measurement of different features on larger parts. Parts can be measured in a single coordinate system without repositioning. Models are...
-
- From The Fabricator
New options added to inspection software
Delcam offers the 2012 release of its PowerInspect inspection software. The new version includes a number of extra options to simplify inspection, as well as basic reverse engineering functionality to the point-cloud module. According to the company, this 64-bit version provides high...
-
- From The Fabricator
Delcam announces new hires
Software provider Delcam is introducing two new staff members at the EASTEC exhibition May 19 to 21 in Springfield, Mass. David Gray has joined the company as sales engineer for the Southeast U.S., in particular Tennessee, Alabama, and Mississippi, and Chris Cole has been appointed as an...