Feed Lease Corp.

2750 Paldan Dr
Auburn Hills, MI 48326-1826

Phone: 248-377-0000
Fax: 248-377-0001

www.feedlease.com

Sales Contact
Joe Fox - Sales Manager
solutions@feedlease.com
248-377-0000

Recent Content on TheFabricator.com for Feed Lease Corp.

News
March 25, 2014
Feed Lease hires regional sales manager
Feed Lease Corp., a provider of coil processing equipment in Auburn Hills, Mich., has hired Patrick Priestap as regional sales manager. In this...
News
March 25, 2014
Feed Lease adds Ajacs to dealer lineup
Feed Lease Corp., Auburn Hills, Mich., has added Ajacs Die Sales Corp. as an authorized dealer of its coil feeding systems. Ajacs, a distributor of...
Product
November 8, 2012
Cut-to-length system handles stock widths to 36 in.
The Feed Lease Corp. has released its new RWC full line cut-to-length system for the metal stamping industry. The system comprises a cabinet-mounted...
News
October 30, 2012
Feed Lease partners with Cydak do Brasil
Feed Lease Corp., Rochester Hills, Mich., has announced its recent business partnership with Cydak do Brasil, a shop in Brazil with more than 20...
Article
January 10, 2012
Roll reversal: From air feeds to servo roll feeds
The air-powered gripper feed was once the standard press feeding device in most stamping operations. It was simple and cost- effective. Servo-powered roll feeds have emerged as an attractive alternative, especially as the technology has proven itself over the years and the cost has fallen with its wider adoption.
Product
September 16, 2008
Servo-powered feeder/straightener suitable for heavy-gauge, high-strength steel
The Power-Core series of feeder/straighteners from Feed Lease are suitable for heavy-gauge, high-strength steels. Material up to 84 in. wide and up...
Article
December 13, 2005
Coil feed line considerations when stamping HSS
With its higher tensile and yield strengths, HSS is stronger at any given gauge than conventional "mild" steels. Initially, lighter-gauge HSS was used to replace heavier-gauge mild steel to reduce weight in many automotive parts, and this continues to be the most widely used application for HSS. However, as a new trend to run thicker and thicker gauges of HSS continues, stamping fabricators are evaluating their press feeding and coil handling equipment, as well as press tonnage capacities and die designs to ensure that these harder parts can be formed effectively. The dynamics of HSS have a bearing on feeding, straightening, and coil handling equipment.

Related Categories

Coil Processing and Continuous Strip Processing
Coil Cars and Cradles
Coil Processing and Continuous Strip Processing
Coil Positioners-Downenders and Upenders
Coil Processing and Continuous Strip Processing
Coil Straighteners
Stamping and Hydroforming
Press Feeds
Tube and Pipe Producing
Straightening Machines
Coil Processing and Continuous Strip Processing
Uncoilers and Recoilers