Fronius USA LLC

6797 Fronius Drive
Portage, IN 46368

Phone: 219-734-5500
Fax: 219-734-5502

www.fronius-usa.com

Recent Content on TheFabricator.com for Fronius USA LLC

Article
May 7, 2015
Synchronized welding
No one doubts that welding equipment has advanced to the point where it has greatly improved welding results and productivity when compared to the technology of previous decades. That doesn’t mean that there isn’t room for improvement. Fronius has attempted to address some of GMAW’s shortcomings with its LSC welding platform.
News
April 29, 2015
Fronius USA hires sales/system engineer
Fronius USA LLC, a provider of welding technology in Portage, Ind., has hired Terrence Stiff as sales/system engineer. He is a veteran of the U.S....
Product
April 9, 2015
Battery-powered GTAW system offers mobile welding
Fronius has introduced the AccuPocket 150/400 battery-powered GTAW system. It offers touchdown ignition, TIG Comfort Stop (TCS), and two- and...
Article
March 25, 2015
Gauging welding’s success
In recent years Ashcroft’s Connecticut plant has changed significantly. It’s an operation transitioning from batch-style production to lean part flow, and a new, flexible welding cell has helped the manufacturer prepare for future improvements.
News
March 24, 2015
Fronius USA names sales/application engineer to tech support staff
Fronius USA has hired Seth Perrin as sales/application engineer in its Portage, Ind., headquarters. He is a 5-year veteran of the U.S. Marine Corps,...
Product
February 23, 2015
Power source supplies up to 600 amps of welding current
Fronius has introduced the TPS 600i. The power source can supply up to 600 amps of welding current at a welding voltage of 44 V and a 60 percent duty...
News
January 28, 2015
Fronius USA adds to staff
Fronius USA LLC, Portage, Ind., a provider of equipment for manual and fully automatic welding applications, resistance spot welding, and cladding,...
Product
January 27, 2015
Lightweight welding torch withstands harsh impacts
The new PullMig push-pull welding torch from Fronius, which weighs 3.5 lbs., can survive a fall from almost 10 ft. completely unscathed, says the...
Product
December 22, 2014
Welding trainer designed for robot programmers
Virtual Welding Robotics by Fronius is available to instructors to assist the training of robot programmers. With this simulation platform, trainees...
Article
November 5, 2014
Going beyond commodity sheet metal perforation
Accurate Perforating doesn’t just make holes anymore. It provides entire perforated and fabricated sheet metal components. The 200-employee Chicago manufacturer has done a lot to stand out in a consolidated sector.

Related Categories

Welding and Joining
Power Sources-GMAW (MIG)
Welding and Joining
Power Sources-GTAW (TIG)