Hilma
Hilma Introduces New Magnetic Quick Die Change Systems
Hilma has been safely clamping dies for more than 50 years, and now introduces manual magnetic quick die change, in addition to hydraulic die clamping. The new M-TECS magnetic die change system clamps existing dies without retooling. The clamping force is evenly distributed, reducing tool wear. Custom engineered to your application, the new magnetic die change offers a superior multi-level safety system.
Carr Lane Roemheld Mfg. Co.
927 Horan Drive
Fenton, MO 63026
Phone: 636-386-8022
Fax: 636-386-8034
Recent Content on The Fabricator for Hilma
-
- From The Fabricator
New wedge clamp from Hilma offers patented safety feature
Hilma has introduced a new version of its wedge clamp that features a patented safety notch added to the tapered clamping bolt. The notch supports the upper die in the event of a pressure loss. The wedge clamp comprises a hydraulic cylinder block and a bolt guided within the housing. As it clamps...
-
- From The Fabricator
Hilma launches online die lifter configurator
Hilma has launched an online configurator for customizing roller and ball bars at hilma-usa.com/die-lifter-configurator/. It simplifies the die lifter specification process and quickly provides a dimensioned drawing in imperial and metric units. Optimized for use on Android and Apple smartphones...
-
- From The Fabricator
M-TECS 120 and 230 magnetic clamping systems added to Hilma quick die and mold change catalog
Hilma, a division of Carr Lane Roemheld, has introduced a new edition of its quick die and mold change catalog. In addition to a variety of clamps and lifters, cylinders, power units, and valve packages, the catalog now highlights magnetic clamping systems for plastic and rubber molding machines....
-
- From The Fabricator
Traveling clamp's modular design allows for various configurations
Hilma's new Flexline rapid clamping system is designed to clamp various sized dies automatically on the press slide. The system's modular design allows many options, making it suitable for most presses and die sizes. It is designed for retrofit or new press installation, single machines or...
-
- From The Fabricator
Mechanical clamping nut adapts to varying clamping edge heights
Hilma's new retrofittable mechanical clamping nut provides high clamping force with low torque in small spaces for clamping and locking of dies on stamping press beds and rams. With temperature resistance up to 300 degrees F, the clamping nut can be clamped and unclamped by hand. It offers a...
-
- From The Fabricator
Hydraulic roller bars assist die change process
Hilma offers hydraulic roller bars in pairs or sets to lift the die and provide a roller surface to roll the die in and out during the die change process. For use in standard 1.0625-in. or ASA T-slots, the bars’ hydraulically operated supporting rollers allow simplified movement in line with the...
-
- From The Fabricator
Compact power unit suitable for die clamping/lifting systems
A new electrically driven, high-pressure hydraulic power unit from Hilma Div. of Carr Lane Roemheld is suitable for small and midsize die clamping and lifting systems. The compact, lightweight, modular unit comes with a motor, pump, oil reservoir, valve configuration as needed, pressure gauge,...
-
- From The Fabricator
Magnetic quick die change system introduced
Hilma, Ellisville, Mo., has introduced the M-TECS magnetic quick die change system. The system clamps existing dies without retooling. The clamping force is evenly distributed, which reduces tool wear. Custom engineered for individual applications, the system is designed to provide maximum...