JMT USA Showroom


Recent Content on for JMT USA

October 13, 2015
Fiber laser head’s integrated sensor monitors cutting process
JMT has introduced the HDFL fiber laser, which incorporates a high-power fiber delivery system from IPG Photonics and a ProCutter head from Precitec....
August 24, 2015
JMT adds to sales force
JMT, a provider of metal fabricating machines in Salt Lake City, has hired three regional sales managers who will work out of local offices. Jerry...
June 11, 2015
JMT appoints two laser specialists
Salt Lake City-based JMT, a provider of machine tools to the metal fabrication industry, has appointed two new staff members to technical positions...
May 7, 2015
JMT names national sales manager
JMT, a provider of machine tools to the metal fabrication industry based in Salt Lake City, Utah, has promoted Shane Reynolds to national sales...
April 8, 2015
¿Es más adecuada una prensa dobladora o una roladora para el trabajo?
Algunos talleres de fabricación en metal usan prensas dobladoras y formado gradual para hacer formas cilíndricas, mientras que otros son más adeptos a usar máquinas roladoras. Este artículo explora los factores involucrados en determinar si una prensa dobladora o una roladora es la máquina correcta para el trabajo.
February 5, 2015
JMT USA names president
The board of directors for Jorgenson Industrial Companies has announced that Jared Peterson has been appointed president of the JMT USA division,...
August 4, 2014
Is a press brake or plate roll the right tool for the job?
Some metal fabricating shops rely on press brakes and bump forming to make cylindrical shapes, while others are more adept at using plate rolling machines. This feature explores the factors involved in determining whether a press brake or a plate roller is the right machine for the job.
April 23, 2014
Pyramid roll forms contoured, conical, tapered parts
The JMT Aircraft Roll is a pyramid roll that can form the leading edge of aircraft wing skins and other contoured, conical, and tapered parts used in...
October 7, 2013
Don’t get flattened by the wrong plate roll
Plate rolling is not as simple as using a press brake to make a 90-degree bend on a small piece of metal. With the right equipment, however, a fabricator can learn to become a very good plate roller in a short amount of time.
August 13, 2013
Fiber laser cutting machine increases energy efficiency
JMTUSA has teamed up with Nukon to bring a fiber laser cutting machine to the Americas. The machine uses solid-state technology to create the laser...
2895 S. 300 W.
Salt Lake City, UT 84115

Phone: 855-773-7727
Fax: 801-493-0157

Sales Contact
Shane Reynolds - National Sales Manager

Contact JMT USA

Related Categories

Cutting-Sheet and Plate
Band Saws
Forming, Fabricating, and Bending-Sheet and Plate
Cutting-Sheet and Plate
Lasers - 2-D
Forming, Fabricating, and Bending-Sheet and Plate
Cutting-Sheet and Plate
Plasma Cutting Equipment
Forming, Fabricating, and Bending-Sheet and Plate
Press Brakes
Drilling, Piercing, and Punching - Sheet and Plate
Punch Presses-Turret
Forming, Fabricating, and Bending-Sheet and Plate
Roll Benders
Cutting-Sheet and Plate