J.W. Winco Inc.

JW Winco offers new GN 1150 hygienic design latches, designed to repel dirt.

JW Winco has developed a product family of special standard parts made of stainless steel for very high hygienic requirements.

Winco has updated its pneumatic clamps with new features to help increase reliability and lifespan.

Standard industrial machine components supplier JW Winco Inc., A Ganter Company, New Berlin, Wis., has opened a new branch and distribution center in Woodbridge, Ont. J.W. Winco Canada Inc. has more than 6,000 sq. ft. of warehouse space and more than 2,300 sq. ft. of office space. The location...

New Berlin, Wis.-based industrial machine component supplier JW Winco Inc., A Ganter Company, has opened a new branch in Santa Catarina, N.L., Mexico. The facility has more than 1,200 sq. ft. of office space and more than 10,000 sq. ft. of warehouse space. The branch will stock over 4,000 parts...

JW Winco Inc., A Ganter Company, offers GN 256 silicone vibration/shock absorption mounts, conical type, with stainless steel components. Available with either a tapped hole or threaded stud, the RoHS-compliant mounts can be used as end-stop bumpers and leveling feet. The silicone rubber material...

J.W. Winco Inc. offers GN 2184 edge protection profiles. The RoHS-compliant profiles are installed on the front edge of metal sheets and plates, protecting the surfaces from damage by sharp edges. The edge finish additionally achieves an optical decorative effect while minimizing the need for...

J.W. Winco Inc. now offers 316L stainless steel GN 139.5 hinges with integrated safety switches. The RoHS-compliant hinges are designed for use in monitoring doors and covers of machines and equipment. Opening the door activates the switch contacts, causing an interruption in a protective circuit...

J.W. Winco Inc. offers the GN 810.1 universal-fit, steel, vertical-acting toggle clamp with vertical mounting base. The toggle clamp is case-hardened sheet metal, zinc-plated, with a blue passivated finish. The bearing pins are tempered, and the hand grip is oil-resistant red plastic. The clamp...

J.W. Winco Inc. offers metric GN 963 cover caps for GN 960 and 961 metric angle brackets for aluminum T-slot profile systems. After the angle brackets are assembled, the RoHS-compliant cover caps are snapped into place via four lugs. They give the angle bracket a finished appearance and protect...

J.W. Winco Inc. offers GN 425.3 stainless steel cabinet U-handles with no mounting threads. Available in metric sizes, the RoHS-compliant handles are designed for applications that require the handle to be welded or for applications that require special threads or holes for mounting. The...

J.W. Winco Inc. offers GN 423 aluminum rack handles in metric sizes. These RoHS-compliant door handles have been designed to accommodate 19-in. rack and enclosure layouts. Handle tube and handle legs are joined by lightly pressing the legs into the tube, allowing for special lengths. Mounting...

J.W. Winco Inc. offers the GN 440.5 stainless steel leveling feet with tapped socket with an elastomer base cap or a vulcanized rubber pad, in inch and metric sizes. These RoHS-compliant leveling feet bear static loads from 7 to 16 kN. Base diameters from 1.57 to 3.15 in. are available. The...

J.W. Winco Inc. offers GN 227.4 A4 stainless steel spoked handwheels in inch and metric sizes, with or without a revolving handle. The RoHS-compliant handwheels offer high mechanical strength and are not affected by shock and knocks. The handwheel body is pressed A4 (AISI 316L) stainless steel,...

J.W. Winco Inc. has introduced GN 340.5 stainless steel leveling mounts with tapped socket and rubber pad in inch and metric sizes. The RoHS-compliant leveling mounts feature a tapped socket of stainless steel with a shot-blast finish. They are available with two pad options: black pad inlay of...