Parker Hannifin Corp.
Tube Fittings Division
3885 Gateway Blvd.
Columbus, OH 43228
Phone: 614-279-7070
Fax: 614-279-7685
Recent Content on The Fabricator for Parker Hannifin Corp.
-
- From The Fabricator
Parker’s BHA TotalPleat serves as replacement filter for PowerCore dust collector
The Industrial Gas Filtration and Generation Division of Parker Hannifin Corp. has developed the BHA TotalPleat aftermarket replacement filter, suitable for use in the Donaldson PowerCore CP dust collector. The deep-pleated design is engineered to keep 92% of the filter face open to flow to allow...
-
- From The Fabricator
Parker Hannifin upgrades SmogHog SHM media mist collector
The Industrial Gas Filtration and Generation Division of Parker Hannifin Corp. has announced new updates to the fabric-style media collector for indoor factory processes. The newly upgraded SmogHog SHM Floor mist and smoke collector can be used as a stand-alone unit or part of a centralized system....
-
- From The Fabricator
Negative pressure yields positive results in resistance welding
A system helps resistance welding lines save water as tip changeouts become more frequent. The technology uses negative pressure, similar to placing your thumb on top of a straw and lifting it out of a glass of water.
-
- From The Fabricator
Technology Spotlight: Negative pressure yields positive results in resistance welding
A system helps resistance welding lines save water as tip changeouts become more frequent. The technology uses negative pressure, similar to placing your thumb on top of a straw and lifting it out of a glass of water.
Tube fittings accommodate extreme-temperature applications
The Tube Fittings Division (TFD) of Parker Hannifin Corp. has introduced Seal-Lok™ Xtreme. This O-ring face seal tube fitting is equipped with a metal sealing ring that makes it suitable for applications in which typical elastomeric sealing is not a possibility because of extreme temperature....
-
- From The Fabricator
Tube connection process speeds assembly of instrumentation systems
Parker Hannifin offers flared-cone connection (FCC) technology to help enhance the performance of compression-style tube connections for instrumentation system designers and installers. Designed for working pressures as high as 22,500 PSI, it speeds the assembly of instrument tubing systems for...
-
- From The Fabricator
Stainless steel seamless tubing designed for hydraulic, instrumentation applications
Parker Hannifin Corp. has introduced a line of quality-assured domestic and nondomestic 316/316L stainless steel seamless tubing for hydraulic and instrumentation applications. The line is designed for systems processing harsh media or in corrosive environments where the safety, integrity, and...
-
- From The Fabricator
Gas blending system allows for blending, diluting up to five component gases
The Instrumentation Products Division of Parker Hannifin Corp. has introduced the Parker gas blending system. It allows users to blend or dilute up to five component gases to produce customized gas mixtures. The system draws from five separate pure gas sources to generate a controlled blend....
Tube fabricating tool package suitable for installing CPI™, A-LOK® fittings
Parker Hannifin Corp. offers a package of heavy-duty, hand-operated tube fabrication tools for small-bore tube assembly. The tools can be used to install both CPI™ and A-LOK® tube fittings in various system applications. The package includes several tools: *Heavy-duty PTB tube...
-
- From The Welder
Air dryer for laser purge helps protect system's mirrors
Parker Hannifin has introduced a line of Balston— air dryers for purging of industrial laser plenums, which protect the laser system's mirrors from dirt and moisture. The dryers use membrane technology, require no electricity, and have no moving parts. Shop compressed air is filtered to...
Extruded-material tube fittings aimed at oil, gas, and chemical markets
The Instrumentation Products Div. of Parker Hannifin has developed a production process for its A-LOK® tube fittings based on stainless steel extrusions. The technology is aimed at users in processing markets such as oil, gas, and chemical. According to the company, the uniformity of metal...
-
- From The Fabricator
Purging the plenum for better laser cutting
Typically, compressed air or nitrogen circulates in the plenum to ensure that water, dirt, dust, smoke, haze, and solid particulate matter are absent so that the mirrors in a laser resonator do not become cloudy. In recent years, membrane air dryer systems that provide drying and removal of particulate matter have been developed for flushing the beam path.
Push-to-connect fittings are silicone-free, weld spatter-resistant
Parker Hannifin Corp.'s Prestoweld push-to-connect fittings are weld spatter-resistant and silicone-free. All fittings feature nickel-plated brass bodies and threads. Push buttons are made from UL94-V0 polymer and are designed for use with the company's Microweld tubing. Fittings are available in...
-
- From The Fabricator
Parker Hannifin announces management appointments
Parker Hannifin Corp. today announced management appointments involving two of its operating groups: Fluid Connectors and Automation. Bob Bond has been promoted to president of the Fluid Connectors Group, replacing Tom Mackie, who is retiring. Bond began his Parker career 28 years ago and has held...
-
- From The Fabricator
Parker Hannifin elects Kennametal executive to board
Parker Hannifin Corp. has elected Markos I. Tambakeras, chairman, president, and CEO of Kennametal Inc., to its board of directors in the class whose term continues through 2006. He will join the board in April 2005. Tambakeras began his career at Kennametal in 1999. Before that, he served in...