Cutmaster 40
Specifications
Model or Series | Cutmaster 40 |
Input – Volts | 110-240 |
Input – Single-phase | |
Input – 3 Phase | |
Input – 50 Hertz | |
Input – 60 Hertz | |
Output – Volts | |
Output – Current (Amps) | 15-40 |
Output – Kilowatts | 6 |
Duty Cycle - Percent | 40 |
Duty Cycle - Temperature (C) | 40 |
Capacity in Mild Steel – Max. Cutting Thickness (In.) | .5 |
Capacity in Mild Steel – Max. Cutting Speed at Max. Thickness (IPM) | 20 |
Capacity in Mild Steel – Recommeded Cutting Thickness | |
Capacity in Mild Steel – Recommended Piercing Thickness | .5 |
Capacity in Mild Steel – Recommended Severing Thickness | 1 |
Air Pressure Required (PSI) | 90 |
Airflow Required (CFM) | 2.3 |
Arc Start - Standard Frequency | |
Arc Start - High Frequency | |
Weight (lbs.) | 22 |
Thermal Dynamics
82 Benning St.
West Lebanon, NH 03784
Phone: 866-279-2628
Fax: 248-553-6841
thermal-dynamics.com
82 Benning St.
West Lebanon, NH 03784
Phone: 866-279-2628
Fax: 248-553-6841
thermal-dynamics.com