Tube & Pipe Supplier Directory



AK Tube LLC  Walbridge, OH

Mechanical tubing: hot rolled, cold rolled, aluminized, galvanized, galvanneal, galvalume, and stainless steel. Standard shapes include rounds, squares, rectangles, and ovals in sizes ranging from 0.750 in. to 0.625 in., wall thickness from 0.035 to 0.180 in. Specialized cutting, end finishing, swaging, expansion, punching, and notching.

ATI - Specialty Alloys and Components  Albany, OR

Tubular products in specialty alloys including hafnium, nickel, niobium, NiTi, tantalum, titanium, tungsten, vanadium, and zirconium for applications such as automotive, aerospace, defense, oil and gas, chemical processing, electrical energy, power distribution, construction, mining, communication, food equipment, and appliance.

Accellent  Collegeville, PA

Drawn tubing for medical applications. Sizes from 0.010 to 0.625 in. (0.25 to 16 mm) OD, seamless and welded-and-drawn. Coil or cut-to-length from 0.25 in. to 20 ft. (6 mm to 6,100 mm).
Hard tooling on ID and OD surfaces for precise dimensional control and smooth surfaces. Intermediate anneals and variable drawing reductions contribute to precise control of mechanical properties and microstructural quality.
A variety of metals: Stainless, precipitation hardenable, nickel, cobalt, titanium, zirconium, niobium, tantalum alloys, and precious alloys.
Sample quantities as small as 25 ft. and production quantities up to 1,000,000 ft.

Allegheny Pipe & Supply Co.  Coraopolis, PA

Carbon Steel (Black & Galvanized) —Seamless / ERW / CW / DSAW
—Light-wall through XXH
—A-53 / A-106-B / API 5L
Stainless Steel
—Seamless & Welded
—Light-wall through XXH
—A-312 / 304 / 316
Other products and services include:
• All-threaded Rod
• Flange Nuts & Bolts
• Flange Gaskets
• Pipe Hangers & U-Bolts (Stainless / Carbon / Galvanized)
• Dresser Fittings
• Aluminum Camlock Fittings
• Steam Traps
• Strainers
• Cut Pipe to Length
• Thread / Groove / Bevel Pipe End

American Douglas Metals Inc.  Orlando, FL

Aluminum extrusions: An integral element in the structural design of industrial and manufactured products, aluminum extrusions in a variety of shapes, sizes, and tolerances. Formats include 6000 series, mill finish, painted, powder coated, anodized, large shapes up to 28 in. wide in rectangular and up to 20 in. wide in round, small shapes, and cut-to-length.

Flat-rolled steel: Carbon and stainless steel in coil, sheet, plate, and blanks.

Flat-rolled aluminum: coil, sheet, and blanks.

American Tube Corp.  Nazareth, PA

Welded stainless steel tubing, bead reduced/controlled, hydrogen bright-annealed, 0.250 to 1 in. OD (6 to 15 mm OD), straight lengths to 40 ft., coiled lengths to 40,000 ft. Alloys: 304, 304L, 316, 316L, 321, 409, 825, 2205 (others on request).
♦ Manufacturing specifications: ASTM A249/SA249,A268, A269, A554, or customer specification.
♦ Quality tests: Eddy current test, air under water, hydrostatic testing, tensile, yield, elongation, reverse bend, flatten, flare, Rockwell hardness, passivity.
♦ Markets served: Oil field maintenance, oil exploration, beverage, heat exchanger/condenser, heater sheathing, automotive, appliance, mechanical (general manufacture), pulp and paper.

Ameritube LLC  Hillsboro, TX

Tube, rod, bar, plate, fittings, and flanges for applications such as chemical processing, desalination, oil and gas, nuclear power, HVAC, transportation, defense, offshore, and marine.
  • Heat exchanger tube and plate in copper and copper-nickel alloys: CDA 12200, 23000, 44300, 68700, 70600, 71500.
  • Beyond copper alloys Ameritube sources, distributes and manufactures, MONEL® alloy 400; INCONEL® alloys 600, 601, 625, 800, 825; HASTELLOY® C276; duplex steels, superduplex steels, and stainless steels SAE 304/L and 316/L.
  • Ameritube provides our customers with fittings and flanges for their marine and offshore applications.
Standard manufacturing practices include nondestructive and mechanical testing. Automated test fixtures are used to verify the dimensional integrity of mission-critical parts. Services include annealing, hydrostatic testing, cutting to length, bending, and machining.

ArcelorMittal Tubular Products  Shelby, OH

Mechanical:
Welded, cold-sized tubes: ASTM A-513, SA 178/214. OD 0.472 – 12.5 in., w.t. 0.022 – 0.685 in. Carbon grades 1006 - 1050, 10B21, 15B21, 90XF, 65W, ST52.3 (E355). Alloy grades 4118, 4130, 8620, HSLA, AHSS.
Welded, cold-drawn tubes: ASTM A-513. OD 0.750 – 12.0 in., w.t. 0.065 – 0.685 in. Carbon grades 1008 - 1050, ST52.3 (E355). Alloy grades 4118, 4130, 8620.
Welded, hollow structural sections: ASTM A-500, grades B and C. CSA 640 - 21-50W. OD 2 x 2 in. to 8 x 4 in. in w.t. 0.125 to 0.375 in.
Seamless, hot-finished tube: ASTM A-519. OD 2.188 in. – 6.75 in., w.t. 0.25 – 1.75 in. Carbon grades 1008 - 1050. Full alloy range: 41xx, 43xx, and 86xx; others available by inquiry.
Seamless, cold-drawn tube: ASTM A-519. OD 1.375 – 7.75 in., w.t. 0.171 – 1.687 in. Carbon grades 1008 - 1050. Full alloy range: 41xx, 43xx, and 86xx; others available by inquiry.

Energy, seamless:
OCTG, API 5CT casing: OD 4.5 – 20 in., grades J/K55, N80, L80, C95, P110, and Q125.
OCTG, API 5CT tubing: OD 2.375 – 4.5 in., grades J/K55 and N80.
Line pipe, onshore and offshore: API 5L/EN/ASTM/ASME, OD 0.5 – 20 in., grades A, B, C, and X42 to X65.
Boiler tube: EN/DIN/ASTM/SR, OD 0.84 – 20 in., carbon and alloy grades.
Structural tube: EN/DIN/ASTM/GOST, OD 0.84 – 20 in., standard grades.

Energy, ERW:
OCTG, API 5CT casing: OD 4.5 – 10.25 in., grades H40, J/K55, and N80Q.
OCTG, API 5CT tubing: OD 1.9 – 4.5 in., grades H40, J/K55, and N80Q.
Line pipe, API 5L: OD 238 – 12.75 in., grades A, B, and X42-X60.
Large-diameter welded, spiral line pipe, API 5L: EN/DIN/GOST/CSN, OD 12.75 – 56 in., grades B and X42 - X70.
Large-diameter welded, LSAW line pipe API 5L: ASTM/DIN/EN, OD 20 – 52 in., grades B and X42 - X65.

Associated Tube Industries  Markham, ON Canada

Tubular products in more than 50 grades of stainless steel and high-nickel alloys, either welded—TIG, plasma, or laser—or welded-and-drawn. Precise OD and consistent mechanical properties are ideal for critical applications in which no leakpaths can be tolerated.
  • 🍁 Products meet ASTM or ASME specifications in metric and imperial sizes. Continuous testing during the manufacturing process for all products and an on-site metallurgical lab for meeting or exceeding industry specifications. Specialized cutting, end-finishing, polishing, cleaning, and packaging is available upon request.
  • 🍁 Sizes and shapes in diameters from 316 to 658 in. (4.7 to 168.1 mm) and wall thicknesses from 0.012 to 0.250 in. (0.3 to 6.35 mm).
  • 🍁 Product available as-welded, welded and bead-hammered, cold drawn, bright annealed, annealed and pickled, O.D. conditioned, or polished. High-quality I.D. micro-finishes in light and heavy wall configurations available. Long-length straight or coiled.
  • 🍁 Extensive history manufacturing non-round shapes and profiles for automotive, food and beverage, power generation, and oil and gas recovery. Cold-drawing and direct-form capabilities minimize tooling costs and turnaround of prototypes.
  • 🍁 New Product Development Team participates in customers' process and design development.

BHD Tubular  Edmonton, AB Canada

Specializes in the distribution of industrial stainless steel pipe, carbon steel pipe, aluminum pipe, as well as other pipe services and products. Serves the oil, gas, and mining industries across Canada and the United States. The administration office is strategically placed next to our 15-acre pipe yard in Edmonton, Alberta. An additional 24-acre yard is nearby in Tofield, Alberta.

BHD can handle any of your pipe project requirements. Custom cut-to-length pipe beveling on pipe 2 to 42 in. dia. Capabilities to torch-cut 2 to 12 in. dia.

Beverlin Manufacturing Corp.  Grand Rapids, MI

Perforated cones, tubes, end caps, flanges, fittings, and assemblies for exhaust, oil and gas, defense, aerospace, nuclear, and industrial applications.

Materials include stainless steels, carbon steel, aluminum, and specialized alloys in nearly any size from 0.300 to 36 in. Od, 0.018 to 0.12 in. wall thickness.

Plating and finishing options include zinc plating (clear, bright, yellow), bright tin plating, nickel plating, electropolishing, phosphate coatings, industrial washing, ultrasonic cleaning, passivation, heat treating, rest removal and preventions, and vibratory deburring.

Perforation patterns include nearly all common patterns, straight and staggered, 20 to 65 percent open. Custom patterns, end margins, skip patterns, seam margins, and non-perforated available. Seam styles include straight weld, spiral weld, tack weld, overlap and spot/resistance weld, and straight inside lock-seam.

Boomerang Tube LLC  Chesterfield, MO

OCTG casing and tubing in grades J55 and Q125, 2.375 to 9.625 in. OD, 0.125 to 0.675 w.t. Proprietary grades also. NDT inspection and testing and third-party inspection for heat-treat.

Bristol Metals, LLC  Bristol, TN

Welded stainless, duplex, super duplex, nickel alloy, moly, and titanium pipe.

♦ Type 300 series stainless, 0.5 to 144 in. OD pipe and 4 to 12 in OD tube.
♦ Duplex alloys: 2205 and 2205D (UNS S31803 and S32205) for resistance to general corrosion and chloride stress corrosion cracking, 2 to 24 in. OD, schedules 10S to 40S.
♦ Super duplex alloys: 0.5 to 144 in. OD pipe. Alloy 2507 (UNS S32750) for excellent corrosion resistance with outstanding resistance to pitting and crevice corrosion. Zeron 100 (UNS S32760), for high strength and corrosion resistance. Alloy F255 (UNS S32550), a 25% chromium duplex ferritic-austenitic for high strength and excellent corrosion resistance.
♦ Nickel alloys: 0.5 to 144 in. OD pipe. For use in temperature environments from cryogenic to 2,000 degrees; resistance to corrosion, oxidation, carburization, pitting, and stress corrosion cracking; suitable for a range of corrosive compounds, including chlorides and sulfuric, phosphoric, and nitric acids.

Bull Moose Tube Co.  Chesterfield, MO

Mechanical tube (ASTM A-513) in round, square, and rectangular.
HSS (ASTM A-500 and ASTM A-1085), ultrasonically tested, available in inch dimensions and hard metric. UHS available.
Sprinkler pipe (ASTM A-135 and A-795 Type E, Grade A), UL listed, mill or custom lengths, coated or bare. Galvanized products are hot-dipped to meet ASTM A-123.Optimized for roll grooving, welding, threading, and plain end fittings.
DF Tube®. This proprietary process forms HSS squares and rectangles directly from strip. DF products don’t go through a round stage first so they have less cold working and decreased residual stress. DF products include DF-C (Charpy), DF-100 (100 KIS MYS), DF-W (weathering grade, ASTM-A847-12), and DF-M (metric).

Cerro Flow Products LLC  St. Louis, MO

Specializing in copper tube for plumbing, HVAC/R, and industrial applications.
♦ Plumbing: residential, commercial, industrial—underground water service, water distribution, medical gas systems, fuel oil and gas distribution, fire sprinkler installations.
♦ HVAC/R: CerroSet® with UV-retardant insulation; CerroPure®, nitrogen-pressurized ACR tube for contaminant-free transportation of refrigerants, oxygen, and others.
♦ Industrial: CerroSpec® tight-tolerance, thin-wall seamless tube that increases the footage per lb. by 3 to 5 percent; CerroGroove® internally grooved precision copper tube that improves heat transfer efficiency.

Chicago Tube and Iron Co.  Romeoville, IL

Pipe, tube, and bar in carbon steel, stainless steel, chrome-moly, aluminum, titanium, copper, brass, and INCONEL® alloy.
♦ Hydraulic tubing, boiler tubing, valves, and fittings.
♦ ASTM A53, A312, A500, A512, A513, A519, A554, and many others.
♦ Services include bending, fabrication, production cutting, coiling, utility/code work, laser cutting, and precision production.
♦ AMSE R, S, and U stamps.

Copper & Brass International Corp.  Houston, TX

Copper water tube and sugar tube. Grooved, dimensional, drain-waste-vent. Straight lengths or level wound coil. Also condenser tube in 443, 706, 715, 687 alloys. ISO 9002 registered.

Felker Bros. Corp.  Marshfield, WI

Specializing in stainless steel. Type 304L and 316L.
– Pipe: 2 in. to 48 in. OD (larger on request). Standard lengths are 10, 20, and 21 ft. (longer on request). W.t. from Sch. 5S to .625 in.
– Tube: 3 in. to 12 in. OD. Length: 20 ft. (longer on request). W.t. from 16 ga. to 8 ga.
– Components: elbows (45 and 90 degrees), laterals, tees, wyes, reducers, stub ends (standard and angled), and a variety of caps, clamps, flanges, and face rings.

Fine Tubes Ltd.  Plymouth, United Kingdom

High specification seamless, welded, and redrawn tubes in stainless steel, nickel, titanium, and zirconium alloys.
♦ Markets include oil and gas, aerospace, nuclear and power, chemical process, high purity, and medical.
♦ Size range: 1 mm (0.040 in.) to 50 mm (2 in.) OD in straight lengths or coils.
♦ AS9100 REV C, ISO 9001 certified and Nadcap approved for ultrasonic testing, heat treatment, and welding.

Fischer Canada Stainless Steel Tubing Inc.  Waterloo, ON Canada

Welded mechanical stainless steel tubing in various ferritic and austenitic grades, ASTM A-554 and A-268. Some exceptions apply.

Round from 1 in. to 6 in. OD; a variety of square and rectangular sizes; custom shapes and open profiles. Available in inch and metric sizes.
♦ 300 series in standard sizes: Round, 12 to 3 in.; square, 12 to 4 in.; rectangular, 12 x 1 to 3 x 5.
♦ 300 series in large sizes: Round, 312 to 6 in.
♦ 300 series in Shur-Grip tubing. Textured surface for a positive grip in handrail and grab bar applications. Uses include swimming pools, mass transit, and handicapped accessible facilities.

Specialty production processes include D1L and Laser Plus™.
♦ D1L: two tubes are simultaneously rolled and seam-welded with a common seam.
♦ Laser Plus™: a technique that provides stronger laser welds; particularly useful in applications where the tube is to undergo extreme forming operations or hydroforming functions.

GL Precision Tube Inc.  Aurora, IL

ERW tube, tested per ASTM A-513:
–Round, square, rectangular, and special shapes.
–OD from 0.709 in to 3.000 in., w.t. from 0.035 in. to 0.160 in.
–Steel grades: C-1008/1010 through C-1022. Also HSLA up to 100,000 PSI MYS.

Great Lakes Copper Inc.  London, ON Canada

Copper products for a variety of plumbing, gas, and general purpose applications:
–Type K and Type L, ASTM B88, for domestic water service and distribution, solar, fuel/fuel oil, natural gas, and liquefied petroleum (LP) gas.
–Type M, ASTM B88, domestic water service and distribution, solar, and compressed air.
–Type DWV, ASTM B-306, for drainage waste, and vent.
–Type G (gas), ASTM B-837, natural gas and LP.
–General purpose, ASTM B75, supply line/retail.
–ACR: Coils and straight lengths, ASTM B 280 cleanliness limit.
–Medical: GL Plus™ pressurized ACR/Med copper tubing, in 10-, 12-, and 20-ft. lengths, variety of sizes, both Type L and Type K. Cleaned, deburred, purged, and pressurized with nitrogen gas.

H & H Tube & Manufacturing Co.  Vanderbilt, MI

Draw, form, and hydroform red metals. Hydroform steel tube. Brass and copper from 18 to 314 in. OD. Wall thickness 0.010 to 0.260 in. Alloy 70/30 welded-and-drawn from 18 to 178 in. OD. Wall thickness 0.010 to 0.030 in.

ISO 9001:2008 certified.

Handy Tube Corp.  Camden, DE

Handy Tube provides customer-specific products for the flow of gas, steam, and liquid in harsh environments. Made-to-order, seamless, stainless steel tubing ranging from 1 in. OD to to finer than a human hair, and in continuous lengths that can exceed a mile.

Hannibal Industries Inc.  Los Angeles, CA

Mechanical. ASTM A513 in 40 diameters and 20 gauges from 12 in. x 0.035 w.t. to 5 in. x 0.250 w.t. (round). Shapes include oval, trapezoid, and tear-drop.
Structural: ASTM A-500, grades B and C; special chemistries upon request. Contact for sizes and gauges.
Ornamental. Superior surface finish, tight corner radii, and excellent formability. Applications include fencing, fitness equipment, security gating, store fixtures, and various other high-visibility products.
Value-added services include cut to length, deburring, chamfering, perforating, and punching.

Haynes Intl. Inc.  Arcadia, LA

More than 100 years of experience in producing high-performance nickel- and cobalt-based alloys for corrosion-resistant and high-temperature applications.

Corrosion-resistant alloys: HASTELLOY® B-3®, HYBRID-BC1® alloy, C-4, C-22®, C-22HS®, C-276, C-2000®, G-30®, G-35®, N alloy, and ULTIMET® alloy.

Heat-resistant alloys: HASTELLOY® S, W, and X alloys; HAYNES® 25, R-41, 75, HR-120®, HR-160® alloy, HR-224® alloy, NS-163®, 188, 214®, 230®, 242®, 263, 282®, 556®, 617, 625, 625SQ®, 718, X-750 , MULTIMET®, Waspaloy, and Ti-3Al-2.5V.

Hofmann Industries Inc.  Sinking Spring, PA

Manufacturer, fabricator, coater of welded steel tubing with two manufacturing locations: Sinking Spring, Pa., and Eau Claire, Mich.
Specialize in small-diameter, tight-tolerance tubing of all shapes and sizes sourced and produced from mill-direct, wide band steel coils from 0.500 to 2.0 in. in round, square, rectangular, oval, elliptical, triangular.
In-house coatings capability; powder coating (lengths to 144 in.), zinc plating (lengths to 130 in.) serving the furniture, kitchen and bath, housewares, lawn and garden, storage, juvenile products, recreational industries with added value capabilities to fabricate - bend, punch, swage, bead, flare, slot, weld, and pack out finished product.

Independence Tube Corp.  Chicago, IL

HSS: ASTM A-500 (Grades B and C) or ASTM A-1085.
–Rounds: 1.660 x 0.109 in. w.t. to 16 x 0.688 in. w.t.
–Squares: 2 x 0.125 in. w.t. to 12 x 0.625 in. w.t.
–Rectangles: 2.5 x 1.5 x 0.125 in. w.t. to 16 x 8 x 0.625 in. w.t.

Value-added services include flux leakage testing, bar coding, EDI, and VMI.

Indiana Tube Corp.  Evansville, IN

ASTM A513 Type 1 & 2, C1008
SAE J526 and J356 Type A
JIS G 3445 STKM 11A
GM-124M
ITC - 70 Grade (oil and gas coiled tubing).
Single-wall tube, HFI.

Coatings including copper, nickel, and aluminum. Services include annealing, deburring, and cutting to length. Available coiled on spools, LWC, and in customer-specified lengths.

James Steel & Tube Co.  Madison Heights, MI

Tubing made to ASTM A-500 and A-513 specifications. Round, square, rectangular, and custom shapes.
—Products up to 4 in. square, 14 to 7 ga.
—Products up to 5 in. square and 6 x 4 in. rectangles, w.t. up to 0.250 in.

Pipe in the following sizes: 1.25 in., 1.50 in. and 2 in. OD, Sch. 10 and 40.

Kloeckner Metals Corp.  Roswell, GA

Welded steel tubing: ASTM A513, A787, A500. Standard sizes and shapes:
- Round: 12 to 334 in.
- Rectangle: 12 x 1 in. to 2 x 4 in.
- Square: 12 in to 3 in.
- Custom shapes and sizes (including oval) available.

Roll formed sections: various profiles requiring strip widths from 1 to 24 in.

Cutting and deburring services offered.

Longhorn Tube LP  Dallas, TX

Mechanical tubing: 16 to 11 ga., 12 in. to 4 in. in square and equivalent rectangle sections. Custom cut as needed.
♦ HSS: 18 - 38 in. x 2 - 8 in. in square and equivalent rectangle sections.
♦ Structural tubing: 18 to 38 in., 2 to 8 in. square and equivalent rectangle sections. Custom cut as needed up to 48 ft. Grades ASTM A-500 A, B, and C in stock. HSLA grades available
♦ Galvanized tubing: 16 to 11 ga., 2 to 4 in. in a G-90 chemical treatment, light oil product, CSB, or A500-B.
♦ Steel handrail profile: 14 ga. section profile, ornamental iron shape.

Major Metals Co.  Mansfield, OH

Specializing in A513 T1, T2, and A787 galvanized tubing. Sizes: 0.625 to 3.125 in. round; 0.75 to 2.5 in. square; 1 x 1.5 to 1 x 3 in. rectangular. Wall thicknesses from 20 to 9 ga. and any decimal in this range.

Markin Tubing  Wyoming, NY

Carbon steel tubing, copper flash tubing, Galfan® tubing, and nickel ID tubing:
♦ Carbon steel tubing. Low-carbon, single-wall tubing. Grade 1006, 1008, and 1010. Dipped in a rust inhibitor solution prior to packaging and shipping. OD from 0.156 to 1.25 in. (3.97 to 31.75 mm), w.t. 0.025 to 0.075 in. (0.675 to 1.9 mm). Many true metric sizes available. Coiled, straight lengths to 52 ft. (15.85 m), and cut-to-length.
♦ Copper Flash Tubing. Produced by electroplating a flash coating of copper, 0.0013 mm thick, applied in-line to the OD of low-carbon steel tubing. Heat transfer and refrigeration applications. Dipped in a rust inhibitor solution prior to packaging and shipping. OD from from 316 to 12 in., w.t. from 0.025 to 0.035 in. Many true metric sizes available.
♦ Galfan® Tubing. Proprietary, 95 percent Zn, 5 percent Al, applied in-line to the OD of low-carbon, small-diameter steel tubing. An aluminum-rich epoxy paint topcoat is applied for extra protection. More than 3,000 hours of salt spray protection, ATM B117. Available in OD 532 to 34 in. (3.97 to 19.05 mm) and 0.025 to 0.049 in. (0.635mm to 1.25 mm). Many true metric sizes available.
♦ Nickel I.D. Tubing. For applications using potentially corrosive fluids, such as ethanol-containing fuels like E85, and where cost effective solutions are a concern. A nickel coating on the ID. Available in OD 38 to 34 in. and w.t. 0.028 to 0.049 in. Many true metric sizes available.
♦ For extended corrosion: nickel ID and Galfan® OD.

Marmon/Keystone Corp.  Butler, PA

Pipe:
Aluminum, extruded, structural: 6061-T6 and 6063-T6, ASTM B429——12 in. Sch. 40 to 4 in. Sch. 40.
Aluminum, extruded, seamless: 6061-T6 and 6063-T6, ASTM B241——18 in. Sch. 40 to 12 in. Sch. 80.
Stainless steel, seamless: ASTM A-312/ASME SA-312, alloys 304(L) and 316(L)——14 in. Sch. 40 to 8 in. Sch. 160.

Tubing, Steel:
Structural, square: ASTM A-513—0.500 x 0.500 in. to 2 x 2 in., 0.065 to 0.109 in. w.t.
Structural, square and rectangle: ASTM A-500—2 x 2 in. to 16 x 16 in., 0.120 to 0.500 in. w.t.

Tubing, Aluminum:
Extruded, seamless: 6061-T6511, ASTM B-241—1.000 to 12.75 in. OD, 0.125 to 1.000 in. w.t.
Structural, extruded: 6061-T6, ASTM B-221/429—0.750 to 8.000 in. OD, 0.125 to 0.500 in. OD.
Seamless, drawn: 6061-T6, WWT-700/6, AMS 4082, ASTM B-210—0.250 to 4.000 in OD, 0.035 to 0.083 in. w.t.
Extruded, square: ASTM B-221—0.750 x 0.750 to 6 x 6 in. OD, 0.062 to 0.500 in. w.t.
Extruded, rectangular: ASTM B-221—0.500 x 1.000 to 4.000 x 6.000 in. OD, 0.125 to 0.500 in. w.t.

Tubing, Cylinder:
Cylinder (finished, honed tubing): ASTM A-513 Type 5, ST 52—1.625 to 11 in. OD, 0.188 to 0.500 in. w.t.
Cylinder (suitable for honing): ASTM A-513 Type 5, ST 52—1.750 to 9.5 in. OD, 0.126 to 0.904 in. w.t.

Metal-Matic Inc.  Minneapolis, MN

Products:
ERW tube (As-welded): 0.366 in. OD x 0.025 in. W to 4.500 in. OD x 0.250 in. W.Options include flash control or scarfing.
DOM (Drawn Over Mandrel): .250 in. OD x .025 W to 4.000 in. OD x .230 in. W.
Hydraulic Fluid Line: J356 - .366 in. OD x .025 in. W to 4.500 in. OD x .250 in. W. J525 - .250 in. OD x .025 W to 4.000 in. OD x .230 in. W
Boiler and Heat Exchanger: A178 - .366 in. OD x .025 in. W to 4.500 in. OD x .250 in. W.
Shapes - Squares: A513 .500 in. OD x .500 in. OD to 2.000 in. OD x 2.000 in. OD
Shapes - Rectangles: A513 .375 in. OD x .625 in. OD to 3.000 in. OD x 2.000 in. OD. p>

Services:
Cutting to length, chamfering, deburring, heat-treating/stress-relieving, annealing, eddy current testing, and stenciling.
Fabrication services: laser cutting, plating, grooving, boring, bonderlube coating, forming, swaging, machining, and heat treating.
Ultrasonic testing available.

Michigan Seamless Tube LLC  South Lyon, MI

Seamless carbon steel and alloys – mechanical tube, pressure tube (T9, T23, T91, multi-lead rifled), pressure pipe. Quenched and tempered. Round, square, hex, combination shapes (for example, round OD/hex ID), and many other unique shapes.
Boiler tube and pipe.
Mechanical products for automotive and transportation; aerospace; heavy equipment; agricultural equipment; OCTG. ASTM/ASME A106, A179, A192, A209, A210, A213, A333, A334, A335, A423, A519 in 0.750 in. OD x 0.083 w.t. to 5.00 in. OD x 0.875 in. w.t.

Nondestructive evaluations and custom chemistries available.

Middletown Tube Works Inc.  Middletown, OH

Decades of experience in producing custom-welded steel tubing for automotive, HVAC, and appliance applications.

Hot- or cold-rolled from high grades of steel, custom tubes are available in a variety of shapes and sizes. ♦ Pickled and oiled, hot-rolled carbon steel tubing for use in gas manifolds, automotive seat frames, and go-carts. ♦ Steel types: HRPO, CR, aluminized, galvanized, galvanneal, electrogalvinized, zinc nickel, 400-series stainless steel grades: CS (A&B), DS (A&B), DDS, EDDS, HSLA Shapes: round, oval, D, double D, square, rectangle, concave, specialty shapes. ♦ Corrosion-resistant coated steel tubing, with re-metallized welded seam (aluminum or zinc).

Diameters: 0.394 to 5.000 in. (10 to 127 mm). ♦ Gauges: 0.024 to 0.120 in. (0.61 to 3.05 mm). ♦ Lengths: 1.000 to 300.000 in. (25.4 to 7,620 mm). ♦ Tolerance: 0.0002 in. with a 32 micro-inch finish or better.

Tube end finishing services include cutting, deburring, dedimpling, end facing, and chamfering for mandrel bends, expansions, or reductions. ♦ End cuts: punch cut, Haven cut, Brehm cut.

Destructive and non-destructive tests that exceed industry standards by as much as 200 percent. Severe expansion, reducing, flaring, and bending. ♦ On-site metallurgy lab provides assistance in application development and troubleshooting technical issues. Quick response (less than 24 hours) to your query, issue, or RFQ. ♦ Expansive tooling inventory across three locations: Middletown Tube Works, Shelby Welded Tube, and Dothan Tubular Products.

Morse Steel Service  Bellingham, WA

Black pipe from 14 in. Sch. 40 to 6 in. Sch. 80.
Round tube from 4 in. OD x 0.109 to 14 in. OD x 0.134.
Square tube from 12 x 12 x 0.065 in. to 8 x 8 x 0.250.
Rectangular tube from 112 x 34 x 0.065 to 10 x 4 x 0.188.

Services include cutting and bending for fabricators, manufacturers, contractors, and industrial maintenance applications.

O'Neal Manufacturing Services  North Birmingham, AL

Tube - HSS, mechanical ERW, DOM, cold-drawn seamless, and hot-finished seamless. Pipe - A500, A53, A106, and A252. Structural, mechanical, and pressure applications. Services include laser tube cutting, oxyfuel, and plasma cutting; shearing; sawing; machining and welding.

O'Neal Steel  Birmingham, AL

Tube - HSS, mechanical ERW, DOM, cold-drawn seamless, and hot-finished seamless. Pipe - A500, A53, A106, and A252. Structural, mechanical, and pressure applications. Services include laser, oxyfuel, and plasma cutting; shearing; sawing; and forming.

Perforated Tubes Inc.  Ada, MI

Perforated tube for myriad applications, including acoustical dampening, EMI shielding, oil rig filtration, structural support, safety guards, diffusion (liquid, gas, vapor, or light), grilles or trim, liquid filtration, agricultural strainers and filter elements, and decorative items. Diameters from 14 to 12 in. OD in mild steel, stainless steel, Hastelloy® alloys, INCONEL® alloys, MONEL® alloys, and titanium. Seams are available in straight, spiral, and spiraled and louvered. Options include endcaps, flanges, and threaded-end connectors.
Two perforation patterns: straight and staggered. Hole diameters from 0.0450 to 1 in. in pitches from 0.0660 to 1.250.

Pittsburgh Tube & Steel  Middlesex Twp., PA

Producer of welded steel tubing, low carbon and stainless steel, produced to ASTM A513, A500, A787, A554, A249, A269, and A789. Mill minimums apply to all orders. Please contact the company to review dimensions and quantities.

Plymouth Tube Co.  Warrenville, IL

SEA-CURE® stainless steel, developed specifically to resist chloride-induced pitting, crevice- and stress-corrosion cracking. OD: 0.625–2 in. ASTM A803, ASME SA-803, and ASTM A268.
XtraLowStress® feedwater heater tubing, engineered for low residual stress. OD 0.5-1.625 in. ASTM A-688 and ASME SA-688.
Other stainless products for aerospace and heat exchanger applications, and a variety of carbon and alloy seamless and DOM tubing for uses such as automotive, hydraulic, high-pressure hydraulic, transportation, utility, agricultural, off-highway equipment, RV, medical, and tooling.

Ryerson  Norcross, GA

Pipe:
Welded: ASTM A-312 and A-778, in grades 304L, 316L, 2205, sizes 14 to 36 in., Sch. 10S, 20, 40S, 80S.
Seamless: ASTM A-312, sizes 14 to 16 in., Sch. 10S, 40S, 80S, 120, 160, XXH.
Fittings: Butt-welded, welded, and seamless, A403WPW, A403WPX, A403WPS, sizes 12 in. to 24 in., Sch. 10S, 40S, and 80S. ♦ Types: LR 90, SR 90, 45, Tee, red. Tee, caps, concentric and eccentric reducer, type A and type C stub ends.
Fittings, 150-lb.: grades 304 and 316, sizes 18 to 4 in. End type: threaded and socket weld. ♦ Types: 90, 45, ST. 90, coupling, half coupling, reducing coupling, hex bushing, square and hex plug, union, cross, cap, tee.
Fittings, 3,000-lb.: ASTM A-182, grades 304L, 316L, sizes 14 to 4 in. End type: threaded and socket weld. ♦ Types: 90, 45, ST. 90, coupling, half coupling, reducing coupling, hex bushing, square and hex plug, union, cross, cap, tee, o-lets.
Flanges: ASTM A-182, grades 304L and 316L, sizes 12 to 24 in., Sch. 10S, 40S, 80S, pressure rating 150, 300, 600, 1,500 lbs. ♦ Types: Slip-on, blind, lap-joint, threaded weld-neck, and socket weld.
Plate flanges: grades 304 and 316, sizes 1 to 12 in. ♦ Types: pipe slip-on, tube slip-on, and blind.

Tubing:
Sanitary, ASTM A-270, grades 304L and 316L, sizes 1 to 6 in., w.t. of 0.065, 0.083, and 0.109 in.
Seamless Instrumentation Tubing Specification: ASTM A-213 and A-269, grades 304L and 316L, sizes 14 to 1 in., w.t. of 0.035, 0.049, 0.065 in.
Fittings: Butt-welded and compression.
Nipple TBE, grades 304L, 316L, sizes 14 to 4 in., Sch. 40S, 80S, threaded.

Sharon Tube Co.  Sharon, PA

DOM mechanical tubing, 6.625 to 9 in. OD. Grades 1010AK, 1020AK, 1026AK, ST52.3, 4130, 1030. 1035, ST52.3 V. Tempers: as-drawn, stress-relieve annealed, fully annealed.
ERW mechanical tubing, .0675 in. to 6.625 in. OD, A513 Type 1, A500 B, and A500 C; grades 1010AK, 1020AK, 1026AK, ST52.3, 4130, 1035, 1037, ST70XF, and 1026MODS. Tempers: as-welded, stress-relieve annealed, fully annealed.

Shaw Stainless & Alloy  Marietta, GA

Shaw specializes in stainless steel PVF and offers other alloys including carbon steel, aluminum, and nickel alloys.

› Nominal pipe sizes: 18 to 36 in., Sch. 5S – XXH.
› Tube sizes: 116 to 16 in. OD, wall thickness 0.010 to 2 in.
› Stainless fittings and flanges, threaded and socketweld, in nominal pipe sizes 18 to 6 in.
› Pressure ratings: 150 – 3,000 – 6,000.
› Weld pipe fittings in nominal pipe sizes 12 to 36 in., Sch. 5S to XXH.
› Flange types: weld neck, slip-on, threaded, blind, lap joint, plate.

Shaw also stocks sheet, plate, bar, angle, sanitary tube, and valves, and offers custom fabrication services: polishing, threading, bending, grooving, forming, welding, machining, saw cutting, laser cutting, high-definition plasma cutting, waterjet cutting, sand blasting, and powder coating.

Steel Tube Inc.™  Statesville, NC

Mechanical and structural steel tubing, carbon steel and galvanized, primarily ASTM A513 type 1 and type 2, in squares, rounds, and ovals.
—Rounds: 0.875 to 1.900 in. OD, w.t. 20 to 13 ga.
—Squares: 0.500 in. OD, w.t. 20 to 16 ga.; 0.750 in. OD, w.t. 20 to 14 ga.; and 0.875 to 1.500 in. OD, w.t. 20 to 13 ga.
Additional processes and services include clear UV coating, ultra-precision cutting, and deburring.

Stupp Corp.  Baton Rouge, LA

API 5L B up to X80; CSA Z245.1 up to 550 Cat. II. HFW: OD 10 to 24 in., w.t. 0.250 to 0.625 in., length up to 80 ft. SAWH: OD 24 to 60 in., w.t. 0.250 to 1.000 in., length up to 80 ft.

Superior Tube Co.  Collegeville, PA

Small-diameter, precision tubing in stainless steel, nickel, titanium, and zirconium alloys, seamless, welded, and redrawn.
Markets include nuclear, medical, aerospace, oil and gas, chemical process, and durable goods.
Size range: 0.010 in. (¼ mm) OD up to 1½ in. (38.1mm) OD.
Straight lengths to 45 ft. (14 m), coiled tubes to 3,000 ft. (915 m) long.
AS9100 compliant and Nadcap NDT certification.

T & B Tube Co. Inc.  South Holland, IL

Carbon steel tube — ASTM-A513 tolerances unless otherwise specified — from 0.375 to 3 in. OD. Lengths from 30 ft. to 1 in. Services include cutting to length, deburring, plating, custom packaging, lab testing, consignment, and VMI.

TMK-Ipsco  Houston, TX

Line pipe products:
· Seamless – API, CSA, 238 to 412 in.
· ERW – API, CSA, 238 to 16 in.
· ERW – GIPI, 858 to 24 in.
· DSAW: Longitudinal – 20 to 56 in.
· DSAW: Helical – 22 to 100 in.

Industrial products, seamless:
· Standard pipe – 2.375 to 4.500 in.
· Fitting pipe – 2.125 to 5 in.
· Mechanical tubing A519 – 2.375 to 6 in.
· Boiler/heat exchanger/mechanical – 0.200 to 6.625 in.
· Standard/pressure/general service pipe – 2.875 to 12.750 in.
· Header piping – 0.625 to 9.625 in.

Industrial products, ERW:
· Standard pipe – 238 to 16 in.
· Piling, 858 to 16 in.
· HSS A500 – Sq. 2 to 7 in.
· HSS A500 – 3 x 2 to 8 x 6 in.

TPW Pipe and Steel  Baker, MT

ASTM A-53, grades F, T and C: galvanized standard pipe, 0.125 to 4 in. OD.
ASTM A-53, grade F: polyethylene standard pipe, black, 0.0375 to 1.5 in. OD.
ASTM A-106, grade B: Sch. 80, 0.250 to 8 in. OD

Tef Cap Industries  West Chester, PA

Serving the needs of industries such as aerospace, medical, chemical processing, and semiconductor manufacturing, Tef-Cap Industries offers more than 50 years’ experience with fluoropolymer (Teflon) tubing. Provides custom fabrication of PTFE, FEP, and PFA fluoropolymer tubing.
PTFE: AWG standard wall 2:1, AWG thin wall 2:1, AWG light wall 2:1, fractional 2:1, fractional 4:1, and dual wall.
FEP heat shrink: FEP 1.3:1, FEP 1.67:1, and FEP roll covers.
Convoluted tubing: standard flex PTFE, extra flex PTFE, standard flex FEP, and extra flex FEP FEP, PFA, and PTFE tubing—AWG standard wall, AWG thin wall, AWG light wall, fractional, 0.030-in. industrial wall, 0.062-in. heavy construction.

Tejas Tubular Products Inc.  Houston, TX

Casing. Seamless and ERW, 4.50 to 9.625 in. OD, 0.250 to 0.750 in. w.t., in the following grades: J55, M65, N80, L80, C90, C95, C110, and P110.

Tubing. Seamless and ERW, 2.375 to 3.50 in. OD, 0.154 to 0.254 in. w.t., in the following grades: J55 (including normalized after upset), L80, N80, and P110.

Line pipe, API 5L: 2, 3, 4. and 6 in. OD, grade B.

API drill pipe, 2.375 to 5 in. OD, in grades E75, X95, G105 and S135. Products include standard drill pipe, drill collars, spiral drill collars, standard heavy-weight drill pipe, and spiral heavy-weight drill pipe.

Titanium Joe Inc.  Kingston, ON Canada

Titanium sheet, plate, bar, tubing, and weld wire. Accepting small orders for prototypes and hobbyists and large quantities for production orders.

Tubing alloys:
→ 3Al-2.5V in the following range: 0.25 in. OD (0.0160 in. w.t.) to 2.875 in. OD (0.0370 in. w.t.).
→ CP Grade 2 in the following range: 0.1250 in. OD (0.0350 in. w.t.) to 5.500 in. (0.0790 in. w.t.).

Most products sold in 12-in. increments (max. length from 24 in. to 96 in. depending on the product).

Tube Developments Ltd.  Glasgow, Scotland, United Kingdom

Seamless carbon steel line pipe: API 5L (latest edition) grade B and X42 (ISO 3183) grade L245/L290. ASTM/ASME A106 grade B, A53 grade B (latest edition), NACE MR 0175 (ISO 15156). Sour or non-sour service.

Low-temperature carbon steel pipe: ASTM A333 grade 6, sour or non-sour service. Charpy impact tests at -50 degrees C.

Galvanized threaded-and-coupled carbon steel line pipe: API 5L (latest edition) grade B and X42 (ISO 3183), grade L245/L290. ASTM A106B, ASTM A53B, and ASTM A333 grade 6 (latest edition). Galvanized coating in accordance with ASTM A53. NPT/API threading. Fully certified, 3000-lb. full couplings. .

Services: .
• NDT (ultrasonic, MPI, EMI, radiography). Precision cut-to-length. End preparation (beveling to ANSI B 16.25. or API 5L; threading and coupling to NPT and BSP standards).
• Lab testing (mechanical tests, chemical analysis, corrosion testing by independent and approved laboratories).
• Shot blasting and painting (blasting to SA2.5 and painting to clients requirements). Coating (galvanizing, FBE, or wrapped polyethylene). Heat treatment (normalizing or quench-and-temper).

Tubular Steel Inc.  Toronto, ON Canada

ERW mechanical tubing, OD from 8 to 76.2 mm (0.315 to 3.000 in.) in thicknesses from 0.7 to 3 mm (22 to 11 ga.) in various shapes to customer specifications. Industries served include automotive, lawn and garden, fitness, furniture, and health care.

US Metals Inc.  Horsham, PA

Tube, pipe, valves, flanges, and fittings in nickel, stainless, and chrome alloys for power generation, gas and chemical processing, and oil refining:
· Seamless pipe, welded pipe, heater tubes, butt-welded and forged fittings, cast and forged valves, and flanges.
· Specialty metals include Alloy 20, nickel 200, nickel 201, MONEL® alloy 400, INCONEL® alloys, INCOLOY® alloys, Hastelloy® alloys, and duplex metals.

United Industries Inc.  Beloit, WI

Laser-welded stainless steel tubing, with additional capabilities for custom fabrication including laser cut to length, laser-cut slots and holes, punching and forming, expanding, flaring, flanging, perforating, welding, polishing, and buffing. Tubing is 100% made in the USA and is TS16949 certified.

Valmont Industries  Valley, NE

Steel tubing manufactured to ASTM A513, A787, A135, A500, A847, A252, A53, and A268. Chemistries include carbon 1006-1030, 4130, weathering steel, HSLA, ultrahigh strength, ultralow carbon, ZAM®. Options include hot rolled, pickled and oiled, cold rolled matte and brite, aluminized, pre-galvanized, hot dip galvanized, 409 stainless, and perforated. HSS from 12 x 10 in. to 60 x 48 in., w.t. from 0.312 to 1.000 in., comply with ASTM A1065.
Standard chemistries are ASTM A572 Grade 50, Grade 65, Grade 70, and ASTM A588 weathering steel are standard. Inquire about other chemistries.

Victory Steel Products Corp.  St. Louis, MO

Well casing, drive pipe, drop pipe, couplings, and drive shoes:
· Black or galvanized steel from 2.375 to 48 in. O.D., wall thickness from 0.154 in. to extra heavy
· Threaded and coupled. Diameters: 2.375 to 12.75 in. OD. Lengths: 10, 14, 20, 21 ft., or double random
· Beveled plain end. Diameters: 2.375 to 48 in. OD. Lengths: 10, 14, 20, 21 ft., or double random
· Butler-Larkin drive shoes: All threads and weights for rotary or cable applications

Structural pipe and tube:
· Seamless and welded (ERW and DSAW) structural-grade pipe, 4.5 to 72 in. OD, in ASTM specifications and secondary mill material
· Rolled-and-welded to order in sizes up to 144 in. OD.
· Precision saw cutting and end finishing services available

Sprinkler pipe: UL-listed and FM-approved domestic material in schedules 7, 10, 30, and 40. Foreign or galvanized material for applications that don’t require UL or FM certification.
· Schedule 10, 1.25 to 4 in. OD and Schedule 40, 1 to 2 in. OD.
· All material meets ASTM A-135, Grade A specification, 300 PSI. Approved for all threaded couplings and welded outlets, and accommodates roll-grooved and plain-end fittings
· Coated to prevent corrosion and UV degradation. Accepts any required paint application
· All sizes can be galvanized to meet FM requirements for dry systems

Standard products:
· Seamless: ASTM, ASME, and API, max. dia. 26 in. OD., max. w.t.: 3.00 in.
· Welded: Black or galvanized in single or double random lengths, diameters 2.375 to 48 in. OD; w.t. up to 1.00 in.
· Rolled and welded: Carbon steel, ASME Section VIII or section IX. AWS D1.1-80 (Structural Welding Code Steel, Steel), 25 in. ID to 144 in. OD, w.t. up to 1.00 in.

Vita Needle Co.  Needham, MA

Stainless steel alloys, mainly 304 and 316; also 321, 347, 600, and 52. Other alloys on request. Sizes: 0.005 to 0.375 in. OD in w.t. from 0.002 to 0.040 in.

—High-temperature nickel alloys: Kovar®, suitable for microwave/power tubes and components requiring an inlet into an otherwise enclosed space. Also known as 29-17 alloy or ASTM F-15.
—MONEL® alloy 400: Good corrosion resistance, especially salty and caustic reducing environments. Temperature range from below 0 to 1,000 degrees F. Marine engineering, chemical/petroleum, distillation, and heat exchanger applications.
—Alloy 52: Useful in lighting and sensor applications.
—Alloy 600: Corrosion resistance at high temperatures. X-750: Corrosion resistance at high temperatures, useful strength characteristics at high temps, often used in load-bearing components.

Voest-Alpine Tubular Corp.  Houston, TX

♦ OCTG/Casing: 4.5 to 7 in. OD, 0.142 to 0.689 in. w.t. Lengths to 45 ft.

♦ OCTG/Tube: 2.375 to 4.5 in. OD, 0.114 to 0.472 in. w.t. Lengths to 42 ft.

♦ OCTG/Line Pipe: 1.660 to 6.625 in. OD, 0.125 to 0.630 in. w.t. Lengths to 45 ft. API or premium connections:
—VAroughneck® - designed for rotated strings.
—VAsuperior® - designed to meet ISO 13679, CAL IV.
—VAGT® - voestalpine Gas Tight.
—VAF - voestalpine Flush.

Voestalpine Tubulars GmbH & Co. KG  Kindberg, Austria

Seamless tubes for boilers and heat exchangers; pressure, mechanical, and automotive; and hollows for redraw. All products are available according API, DIN, EN, ASME or ASTM standards.
Oil and gas: seamless steel pipes up to 177.8 mm (7 in.) OD.
OCTG such as casing, tubing, and accessories with standard and proprietary thread connections, line pipe and green pipe for drilling applications.
Heat transfer applications include splitting up extracted media in refineries; energy management in power stations; and petrochemical plant components.
Further applications are waste incineration, steam boilers for shipbuilding, and flanges and fittings.
Mechanical products are tailored to individual designs and loads.

Webco Industries  Sand Springs, OK

Welded, cold drawn welded, and cold drawn seamless tubing in carbon steel, nickel alloys, stainless steels, titanium, and specialty alloys. Applications include air cooler, air heater, boiler tube, coiled tubing, steam surface condenser, feed water heater, heat exchanger, instrumentation tubing, mechanical tubing, welded pipe, pressure tubing, specialty stainless tubing, and OEM.
Value-added services include precision cutting, bending, end forming swaging, finning, heat treating, and packaging.

Wolverine Tube Inc.  Decatur, AL

Heat transfer and thermal management products for refrigeration, air conditioning, energy generation, and industrial processes.
♦ Commercial chillers: evaporators and condensers (copper and copper nickel)
♦ Water heaters and boilers: finned tubes )copper and copper nickel)
♦ Copper LWC and straight lengths: residential and light commercial HVAC/R
♦ Petrochemical and geothermal applications: finned tubes (copper, copper nickel, carbon and stainless steels, admiralty brass)
♦ Fabricated products: copper and aluminum products, copper capillary tube, and control tube
♦ Cold plates and base plates: liquid cooling systems for electronics systems