Anver Corp. Showroom

Visit Anver Corp.  

 

   Found 21 results for "Anver Corp."...

      Just show me: Everything | Articles | News | Products

Product

January 15, 2013
Vacuum lifter-tilter loads strip metal coil onto mandrel
Anver Corp. has introduced the AT series vacuum lifter-tilter. The compact unit lets an operator pick up a thin-strip metal coil from the top surface, keeping the center hole unobstructed, and then manipulate and load it onto a mandrel.... Read more...

Product

December 18, 2012
Vacuum lifter handles domes, spheres
The Anver VFP series vacuum lifter features an interchangeable, custom-made, concave-shaped suction pad with a soft, replaceable, sponge-rubber sealing pad. Designed to let one person handle domes and spheres, this below-the-hook vacuum lifter... Read more...

Product

June 12, 2012
Plate, sheet vacuum lifter handles any cutting table material
Anver Corp. offers the E-series mill-duty vacuum lifter, a single-operator, heavy-duty, high-capacity lifter designed for handling heavy ferrous and nonferrous plate and sheet from the top for loading cutting tables. Featuring an all-welded... Read more...

Product

April 3, 2012
Vacuum lifter handles large stampings
Anver Corp.'s new vacuum lifter-flipper handles large stampings and rotationally molded parts. Featuring an offset beam with suction cups for gripping a large tublike item from the inside, the unit is powered for flipping the item 180 degrees... Read more...

Product

November 21, 2011
Vacuum lifter provides powered rotation in both directions, custom antiskid side grippers
Anver Corp. has introduced a new vacuum lifter that provides powered rotation in both directions and custom antiskid side grippers for rotating large, bulky loads. The PROT series rotator can be locked in place and operated from a single... Read more...

Product

October 31, 2011
Fully integrated vacuum lifter with manual tilting handles compact metallic loads
A fully integrated vacuum-hoist lifter with manual tilting, designed to handle compact metallic loads in pick-and-place assembly applications, has been introduced by Anver Corp. Featuring a custom pickup suction pad, the VM series is... Read more...

Product

September 14, 2011
Vacuum lifter/tilter allows single person pick up, loading of coiled products
Anver offers the electric, hoist-based, VB-series vacuum lifter combined with a pneumatic-powered, 90-degree tilter to reorient coiled products. Featuring an articulating handle with fully integrated controls and a vacuum gauge, the device... Read more...

Product

February 17, 2011
Rectangular vacuum cups designed for handling narrow, high-capacity loads with inadequate gripping areas
Anver Corp. offers rectangular vacuum cups designed for handling narrow, high-capacity loads with inadequate surface areas for gripping. The vacuum cups feature NBR rubber bonded onto a machined aluminum hub and include an internal safety... Read more...

Product

December 6, 2010
Vacuum lifter designed for lifting precision metal coils up to 4 ft. dia.
The VPFL-4 air-powered, below-the-hook vacuum lifter, designed for lifting precision metal coils up to 4 ft. dia. from the skid to the winding machine, has been introduced by Anver Corp. The lifter has an X frame with adjustable suction... Read more...

Product

August 10, 2010
Vacuum lifter designed to lift heavy pipe from top and prevent surface damage
A new compact, below-the-hook vacuum lifter for pipe handling has been introduced by Anver Corp. The VPFL series can be equipped with a custom pad attachment featuring a rugged foam pad mounted on a steel plate, which is bolted onto an... Read more...

Product

February 9, 2010
Vacuum lifter attaches to contoured structures, vessels
Anver Corp. has introduced the VPFL4-20-AIR series vacuum generator, a below-the-hook vacuum lifter that attaches to contoured structures and vessels. The lifter features a tribeam design with adjustable, pivoting suction cups. Accommodating... Read more...

Product

September 9, 2009
Vacuum lifter engages from hoist action
Anver Corporation, Hudson, Mass., has introduced a redesigned mechanical vacuum lifter that requires no compressed air or electricity. The mechanical vacuum lifter is self-powered and features a mechanism that creates a powerful suction when... Read more...

Product

April 14, 2009
Hand vacuum cups come in one-, two-finger styles
A series of all-rubber, push-on suction cups for handling metal sheet in the horizontal position has been introduced by Anver Corp. The hand vacuum suction cups are pressed onto the surface of nonporous, light sheet materials to lift them and are... Read more...

Product

January 13, 2009
Side-grip vacuum lifter introduced
A below-the-hook vacuum lifter with side-grip suction pads for handling appliances, fabrications, and products that cannot be picked up from the top has been introduced by Anver Corp. The VPF-57 side-grip vacuum lifter features a 10-ft. beam... Read more...

Product

November 11, 2008
Vacuum lifter works in small footprint
Anver Corp. has introduced a compact, high-capacity vacuum lifter for heavy lifting applications requiring a small footprint. The E4000M16 lifter incorporates all-welded steel construction with double spring suspensions that equally force each... Read more...

Product

October 14, 2008
Vacuum lifter operable from any overhead hoist
Anver Corp. manufactures a compact, air-powered vacuum lifter that can be operated from any overhead hoist and features an adjustable pad attachment for lifting and installing heavy parts. The VPFL4 series lifter runs on 72- to 90-PSI dry, clean... Read more...

Product

May 13, 2008
Powered vacuum lifter/tilter allows one person to lift, tilt panels up to 2,000 lbs.
The Anver AT series vacuum lifter/tilter employs a compressed-air cylinder for powered tilting, allowing one person to lift and tilt panels weighing up to 2,000 lbs. Featuring adjustable suction cups with extra-long suspensions and individual air... Read more...

Product

January 15, 2008
Vacuum lifter handles 48-ft. by 8-ft. steel plate, nonferrous materials
Anver Corp. has introduced a high-capacity, custom-built vacuum lifter for handling 48-ft. by 8-ft. steel plate and nonferrous materials, without damaging their surface. The Anver Mill-Duty vacuum lifter features 12 rectangular suction pads; a... Read more...

Product

September 12, 2006
Compressed-air vacuum lifter lifts up to 550 lbs.
The VM-Series vacuum lifter from Anver Corp. is a hoist-integrated, ergonomic lifting system that operates on compressed air for handling loads weighing up to 550 lbs. The fully adjustable frames and vacuum suction cup assemblies allow it to... Read more...

Product

May 9, 2006
Vacuum lifter handles awkward loads
Anver Corp. offers the VPF-57 below-the-hook vacuum lifters that can be fitted with custom beams for handling long, bent, awkward loads in metal stamping, cutting, and assembly operations. The lifters, which are available with capacities up to... Read more...

Product

March 7, 2006
Electric-powered vacuum lifters support heavy loads
Anver Corp. offers electric-powered vacuum lifters that can be custom-built with frames up to 20 ft. long, various cross-bar sizes, and up to 50 individual valve-operated vacuum cups to support heavy loads. The units include adjustable cross... Read more...