Esco Tool Showroom

Visit Esco Tool  

 

   Found 31 results for "Esco Tool"...

      Just show me: Everything | Articles | News | Products

Product

January 8, 2014
Welding end prep tool battery powered for portability
The Tube Weasel Battery MILLHOGĀ® from Esco Tool is a right-angle-drive, ID-clamping welding end prep tool that employs a wedge-style blade-locking system and TiN-coated cutter blades to perform ready-to-weld end preps without cutting oils.... Read more...

Product

October 22, 2013
Welding end prep tool designed for repetitive milling
The MILLHOG® Mongoose Air Clamp™ welding end prep tool from Esco Tool is equipped with an air-operated clamp that attaches to a tube or pipe ID and releases from it at the flip of a toggle switch. It is suitable for highly repetitive... Read more...

Product

September 30, 2013
OD clamping end prep tool offered with electric motor
Esco Tool offers the electric C-MILLHOG® OD clamping end prep tool for use on thin-wall and heavy-wall tubes with a high percentage of chrome, especially in high-purity applications. The tool has a massive clamp that grips tubing from... Read more...

Product

May 23, 2013
Tube fin removal tool peels rapidly for tube inspection
The Fin MILLHOG® tube fin removal tool from Esco Tool is designed to peel back 4 in. of fin in less than 2 min. to permit rapid inspection and X-ray of the weld for quality control. Suitable for tube repair and replacement, this... Read more...

Product

February 5, 2013
Pipe saw produces end prep bevels for welding
Esco Tool offers the APS-438 air-powered saw and WrapTrack® pipe trolley. It cold-cuts pipe with ±0.0625-in. accuracy and no HAZ to produce end prep bevels for welding. Suitable for cutting all pipe schedules of P-91,... Read more...

News

October 22, 2012
Esco launches new website
Esco Tool, Holliston, Mass., has introduced an upgraded website at www.escotool.com highlighting its portable welding end prep tools, pneumatic saws, and accessories for machining and cutting tube, pipe, pipelines, and boiler tube panels. The... Read more...

News

October 8, 2012
Esco Tool establishes MILLHOG® Channel on YouTube
Esco Tool, Holliston, Mass., has introduced a new channel on YouTube that features tool demonstrations and tutorials about its line of boiler tube welding end prep tools. The MILLHOGĀ® Channel at www.youtube.com/user/millhogman/feed provides more... Read more...

Product

September 18, 2012
Portable beveling tool head removes boiler tube membrane, overlay
Esco Tool has introduced a new, patented membrane and overlay removal head to fit several of its MILLHOG® beveling end prep tools. The head features proprietary inserts shaped like golf tees, rather than screws, that can be rotated to... Read more...

Product

July 24, 2012
Dual-spring hanger features built-in safety chain
The MILLHOG® ET-800 patent-pending, dual-spring hanger from Esco Tool lets users maneuver heavy or bulky tools safely. The two drawbar springs, rated at 610 lbs. each, are mounted onto 8- by 0.375-in. steel plates. A built-in,... Read more...

Product

June 19, 2012
Pipe end prep tool features 1,800-W electric motor
Esco Tool has introduced the Prepzilla MILLHOG® electric ID clamping end prep tool for heavy-wall preps. The heavy-duty unit has dual-opposed tapered roller bearings, direct-drive gears, a rigid blade-lock system, and TiN-coated T-15... Read more...

Product

March 6, 2012
Portable end prep tool speeds on-site pipeline construction
Esco Tool offers the MILLLHOG® Dictator, a portable, ID clamping, welding end prep tool for dry-cut beveling of heavy-wall pipe. The tool features extra-wide clamps for rigidly mounting inside the pipe and incorporates hardened steel... Read more...

Product

November 21, 2011
Welding end prep tool designed for4 use on 8.625 in. ID to 36 in. OD
The Terminator MILLHOG® welding end prep tool from Esco Tool is designed for use on pipe from 8.625 in. ID to 36 in. OD. It clamps rigidly to the ID and has a tracker to compensate for out-of-roundness. Capable of producing symmetrical end... Read more...

Product

September 14, 2011
Portable end prep tool simultaneously bevels, faces, and bores pipe
Esco Tool offers the Wart MILLHOG® right-angle, ID clamping end prep tool for beveling, facing, and boring pipe simultaneously, including compound bevels and J preps. According to the manufacturer, the tool achieves consistent,... Read more...

Product

May 23, 2011
End prep tool features air power-assisted clamping
The MILLHOG® Mongoose Air Clamp™ end prep tool from Esco Tool features air power-assisted clamping for instant attach and release to the tube or pipe ID. Developed for repetitive end preps on tubes from 0.5 to 3 in. OD, the tool is... Read more...

Product

April 5, 2011
Portable end prep tool designed to remove simply from tube and not catch on burrs
Esco Tool’s Ground MILLHOG® is a right-angle-drive, air-powered, portable welding end prep tool that features a clamp rib assembly incorporating a captive internal band and smooth clamp ribs. The ID clamping tool removes simply from... Read more...

Product

January 17, 2011
Welding end prep tool suitable for cutting high-chrome-content boiler tubes, stainless steel, and tubes with overlay
Esco Tool offers the Mongoose MILLHOG® right-angle-drive, ID-clamping welding end prep tool. It features a 1.25-HP motor with a reduction drive gear that produces 240 lbs. of torque at 100 RPM. Suitable for cutting high-chrome-content... Read more...

Product

November 8, 2010
Tool separates fin from tube OD in one step
The MILLHOG® fin tube removal tool from Esco Tool features a patented blade design that separates the fin from the OD of a tube in one step. Capable of peeling back 4 in. of fin in less than 2 min., the rigid ID-clamping tool has no... Read more...

Product

September 13, 2010
Boiler tube expanders allow operators to roll multiple tubes rapidly
MILLHOG® air-powered tube expanders and rolling motors for creating steel-to-steel mechanical seals in boilers, heat exchangers, and condensers are available from Esco Tool. The tools feature precise torque control from 25 to 325... Read more...

Product

July 12, 2010
Pneumatic saw, quick-clamp assembly can be used wherever 90-PSI compressed air supply is available
Esco Tool offers the APS-438 air-powered saw and quick-clamp assembly. The 3-HP saw allows users to cut steel plate up to 2 in. thick and 15 ft. wide wherever a 90-PSI compressed-air supply is available. Operators can take the saw to the... Read more...

Product

March 5, 2010
Pipe saw and track system cuts concrete-lined, ash, superduplex SST, other hard alloys
ESCO Tool offers a pneumatic pipe saw and wraparound track system for making square cuts to within ±0.0625 in. on heavy-wall pipe up to 60 in. in diameter and 4.375 in. thick. The APS-438 universal air-powered saw and WrapTrack®... Read more...

Product

January 12, 2010
End prep blades feature heat transfer chip breaker
Esco Tool offers MILLHOG® cutter blades for its welding end prep tools. Made from T-15 tool steel and TiN-coated for lubricity, the blades feature a chip breaker that transfers heat away from the pipe and into the chip. Designed to keep the... Read more...

News

June 2, 2009
ESCO Tools founder dies
Albert T. Brennan, who purchased the Evans Supply Co. in Winchester, Mass., in 1975, later renamed the firm ESCO Tools, and built it into a leading welding end prep tool manufacturer for the power generation industry, has passed away at the age... Read more...

Product

March 10, 2009
End prep tool holds up to three blades at once
The MILLHOG® line of end prep tools from ESCO Tool comes with the EscoLock™ blade lock system, which holds up to three blades at once to allow simultaneous beveling, facing, and boring without cutting oils. The system features a wedge... Read more...

News

February 10, 2009
ESCO Tool moves to new building
ESCO Tool has acquired and refurbished a 60,000-sq.-ft. building in Holliston, Mass. The company has been located in nearby Medfield, Mass., since 1980.According to Matthew Brennan, president, "We have been the beneficiary of a growing power... Read more...

Product

January 13, 2009
Pneumatic pipe saw cuts all types of alloys, concrete-lined pipe
A pneumatic saw and universal pipe trolley kit for cutting all types of alloys and concrete-lined pipe are available from ESCO Tool. The APS-438 air-powered saw and WrapTrack® pipe trolley let users cut 6-in. to 60-in.-OD pipe accurately and... Read more...

Product

October 14, 2008
Boiler tube panel saw removes boilers in tight areas
Esco Tool offers a panel saw and steel track system that attaches to water wall boiler tubes using weld tabs that help determine the cut line. The PanelHog® APS-438LP low-profile saw and EscoTrack™ System are designed to remove boiler... Read more...

Product

May 13, 2008
Welding end prep tool designed for high-temperature, -pressure applications
Esco Tool offers the MILLHOG® Dictator ID clamping welding end prep tool. It is designed for beveling pipes in which the weld is critical because of high temperatures and pressures. The tool is suitable for use on heavy-wall steam or process... Read more...

Product

April 10, 2007
End prep tool features chatter-free performance
A lightweight welding end prep tool and cutter blades that are capable of performing any angle of prep and facing and boring simultaneously are available from ESCO Tool. The Mongoose MILLHOG® right angle drive I.D. clamping end prep tool is... Read more...

Product

November 7, 2006
Weld clamp provides 15,000 lbs. of force
Esco Tool's HOG-TIE™ weld alignment clamp provides 15,000 lbs, of force for positioning two pipes, boiler tubes, flanges, or plates. It comprises two clamping jaws and a steel strap that inserts between the two sections being aligned. The... Read more...

Product

July 11, 2006
End prep tool provides instant attach, release
The Ground MILLHOG® air clamp welding end prep tool from Esco Tool features air-actuated clamping, which provides instant attach-and-release to the tube ID for improving tube sheet facing productivity. Developed for repetitive end preps on... Read more...

Product

June 14, 2005
End prep blades cut dry
Esco Tool's MILLHOG® cutter blades for welding end prep tools are designed to produce a thick chip without cutting fluids. The blades feature a radical chip breaker to direct the chip away from the tube surface and reduce generated heat.... Read more...