Jet Edge Showroom

Visit Jet Edge  

 

   Found 46 results for "Jet Edge"...

      Just show me: Everything | Articles | News | Products

Product

April 15, 2014
Waterjet cuts 3-D parts from almost any material
Jet Edge’s Edge X-5 waterjet system employs an AquaVision Di controller to cut precise, taper-free parts from almost any material. The 5-axis system can cut 3-D parts such as impellers and bevels up to 50 degrees. With the motion system... Read more...

News

March 6, 2014
Jet Edge names KF Machinery as distributor in Midwest
Jet Edge Inc., a St. Michael, Minn., manufacturer of ultrahigh-pressure waterjet systems for precision cutting, coating removal, and surface preparation, has named KF Machinery as a distributor in Minnesota, North and South Dakota, Nebraska,... Read more...

News

February 19, 2014
Jet Edge marks 30 years in business, names KF Machinery as distributor
Jet Edge Inc., St. Michael, Minn., celebrates its 30th anniversary in 2014. The manufacturer of ultrahigh-pressure waterjet systems for precision cutting, coating removal, and surface preparation, entered the industry in 1984. The company... Read more...

News

November 15, 2013
Jet Edge launches new corporate video on YouTube
Jet Edge Inc., a manufacturer of ultrahigh-pressure waterjet systems in St. Michael, Minn., has posted a new corporate video on its YouTube channel at www.youtube.com/jetedgewaterjets . Featuring a behind-the-scenes look inside the company's... Read more...

News

September 18, 2013
Jet Edge names representative in Taiwan
Jet Edge Inc., St. Michael, Minn., has selected Hsiang Yu Machinery Co. Ltd., Nantou City, Taiwan, R.O.C., as a dealer for its waterjet cutting machines, waterjet intensifier pumps, and portable waterjet systems. The company also carries Jet... Read more...

News

July 15, 2013
Michael Waltrip Racing installs second Jet Edge waterjet cutting machine
Jet Edge Inc., St. Michael, Minn., has announced that Michael Waltrip Racing (MWR) has installed a second Jet Edge precision waterjet cutting system at its fabrication shop in Cornelius, N.C. The Edge X-5, a 5-axis waterjet cutting system,... Read more...

News

January 16, 2013
Jet Edge awarded U.S. patent for ultrahigh-pressure waterjet seal
Jet Edge Inc., St. Michael, Minn., has announced it has received a patent for a mechanism that provides metal-on-metal sealing without the use of conventional plastic seals. This technology uses two convex, curved surfaces in single-line contact... Read more...

News

January 9, 2013
U.S. Army's Blackhorse Regiment installs Jet Edge waterjet system
Jet Edge Inc., St. Michael, Minn., has announced that the U.S. Army's legendary 11th Armored Calvary Regiment (ACR) has installed a Jet Edge precision waterjet cutting system at its home base in Fort Irwin, Calif. The 11th ACR — the... Read more...

Product

August 8, 2012
Modular waterjet pump designed for tight spaces
Waterjet manufacturer Jet Edge Inc. has introduced the iP36-50 modular waterjet intensifier pump. The portable, 36-KSI, 50-HP pump has a modular design, allowing it to move into tight spaces. The pump produces up to 1.8 GPM of... Read more...

News

June 13, 2012
Jet Edge to host exporting seminar July 11
Waterjet systems manufacturer Jet Edge Inc. will co-sponsor a free exporting seminar, Exporting 101, on Wed., July 11, from noon-4:30 p.m. at St. Michael City Center in St. Michael, Minn. Hosted by the city of St. Michael Economic Development... Read more...

Product

May 30, 2012
Waterjet pump uses less electricity
Jet Edge Inc. has introduced the Eco-Jet waterjet pump. The 55-KSI, 30-HP unit features a direct-drive pump design that consumes up to 40 percent less electricity than a 50-HP pump while producing the same output, the manufacturer reports.... Read more...

News

March 26, 2012
Jet Edge receives Governor's International Trade Award
Minnesota Gov. Mark Dayton has presented Jet Edge Inc., a waterjet manufacturer in St. Michael, Minn., with a 27th Annual Governor’s International Trade Award. The award recognizes Minnesota businesses that have shown exceptional... Read more...

News

February 8, 2012
Jet Edge appoints regional sales manager
Jet Edge Inc., St. Michael, Minn., a manufacturer of ultrahigh-pressure waterjet and abrasivejet systems for precision cutting, coating removal, and surface preparation, has appointed Ben Callahan as its new north central regional sales... Read more...

News

January 18, 2012
Jet Edge posts used waterjet cutting equipment on Web site
Jet Edge Inc., St. Michael, Minn., now is posting used waterjet equipment for sale on its Web site at www.jetedge.com. The used waterjet equipment inventory includes ultrahigh-pressure, tie-rod design intensifier pumps, motion systems, parts... Read more...

Product

May 23, 2011
Waterjet intensifier pump produces up to 3 GPM of ultrahigh-pressure water
Jet Edge Inc. has introduced the iP60-150, a 150-HP, 60,000-PSI waterjet intensifier pump. It can produce up to 3 GPM of ultrahigh-pressure water for precision waterjet cutting and UHP surface preparation applications. It supports orifices up... Read more...

Product

February 22, 2011
Waterjet cutting head delivers up to 8.6 GPM of ultrahigh-pressure water
Jet Edge’s High Flow Abrasivejet delivers up to 3.5 lbs./min. of abrasive and up to 8.6 GPM of ultrahigh-pressure water for abrasive waterjet cutting applications. The cutting head is suitable for making separation cuts in steel... Read more...

News

January 31, 2011
Jet Edge opens sales office in China
Jet Edge Inc., St. Michael, Minn., has announced the opening of its new waterjet sales, service, and showroom office in Shanghai, China. The office allows the company to supply and support local customers with service and training facilities,... Read more...

News

January 10, 2011
E.J. Bartells installs waterjet cutting system
E.J. Bartells has installed a Jet Edge waterjet cutting machine at its insulation, refractories, and HVAC fabrication facility in Spokane, Wash. The company provides thermal and acoustical-related products ranging from -350-degree-F cryogenics... Read more...

News

September 21, 2010
Jet Edge names Angel Machinery as distributor for Wisconsin
Jet Edge Inc., St. Michael, Minn., a manufacturer of ultrahigh-pressure waterjet systems for precision cutting, coating removal, and surface preparation, has announced that Angel Machinery is distributing its waterjet machines in Wisconsin.... Read more...

Product

August 17, 2010
Five-axis waterjet cutting machine introduced
Jet Edge Inc. has introduced the Idro line five-axis precision waterjet cutting machine. Capable of cutting almost any material, it is available in three sizes: 5.5 by 6.5 ft. nominal, 5.5 by 13 ft. nominal, and 6.5 by 13 ft. nominal. The... Read more...

News

August 10, 2010
Waterjet technology helps BP cap Gulf oil leak
Waterjet technology companies Jet Edge Inc. and Chukar Waterjet Inc., both of St. Michael, Minn., recently played a key role in helping BP stop the oil leak in the Gulf of Mexico. The companies provided ultrahigh-pressure waterjet equipment and... Read more...

Product

July 12, 2010
Waterjet intensifier pumps available in sizes from 30 to 200 HP
Jet Edge Inc. has released a brochure highlighting its precision waterjet intensifier pumps in sizes from 30 to 200 HP. The pumps can produce pressures from 60,000 to 90,000 PSI and flow rates of 0.65 to 4 GPM for waterjet cutting and surface... Read more...

Product

June 7, 2010
Waterjet pump has redundant intensifier system
Jet Edge's iP60-50R waterjet pump has two intensifier systems. If one of the intensifier systems fails or requires service, the second intensifier system can continue operations until the intensifier pump can be shut down for service. The... Read more...

News

February 9, 2010
Jet Edge hosts AMT, NTMA executives
Jet Edge Inc., a manufacturer of ultrahigh-pressure waterjet systems, recently hosted Douglas K. Woods, president of the Association For Manufacturing Technology (AMT), and Robert L. Akers Jr., chief operating officer of the National Tooling and... Read more...

Product

January 12, 2010
Pressure valve runs multiple waterjets
Jet Edge's patented Dual Pressure Valve® helps increase waterjet cutting productivity by allowing waterjet operators to control water pressure independent of the waterjet pump. With the remotely mounted valve, waterjet operators can run... Read more...

News

October 13, 2009
Jet Edge acquires Calypso Waterjet Systems
Waterjet manufacturer Jet Edge Inc., St. Michael, Minn., has acquired Calypso Waterjet Systems of Dallas, Texas. Founded in 1992, Calypso Waterjet Systems was a manufacturer of waterjet cutting systems before its departure from the water jet... Read more...

Product

September 9, 2009
Single-intensifier waterjet pump introduced
JetEdge Inc., a manufacturer of ultra-high pressure waterjets, has introduced the iP60-100S 100 HP, 60,000 PSI (4,100 bar) waterjet pump. The iP60-100S is a single intensifier version of the company's 100 HP waterjet pump. The pump produces 2.0... Read more...

Article

June 29, 2009
Reusing waterjet cutting abrasive
Tough economic conditions are making it hard for many metal fabricators to stay competitive. Ideas that will help save money and resources are welcome in any shop. For those shops that cut using a waterjet machine, the abrasive in the... Read more...

Article

April 14, 2009
Putting out fires, the lean way
Randon Bernards needs to fill jobs, fast. The fabrication technical lead at Crimson Fire has spent more time interviewing people during the past few months than he has since he arrived on the job six years ago. The shop enjoyed a dramatic... Read more...

Product

March 10, 2009
Waterjet cutting machine available in two sizes features exposed tank for overhead loading
Jet Edge Inc. has introduced a large-format, midrail gantry waterjet system. It features a 21-ft. by 13-ft. work envelope with an exposed tank that accommodates overhead loading. It comes standard with one abrasivejet cutting head; a second... Read more...

Product

December 16, 2008
Waterjet system features 8-ft. by 13-ft. work envelope, allows overhead loading
Jet Edge Inc. has introduced its new Mid Rail Gantry waterjet system. It features an 8-ft. by 13-ft. work envelope with an exposed tank that accommodates overhead loading. It comes standard with one abrasivejet cutting head; a second cutting head... Read more...

News

December 16, 2008
Jet Edge appoints north central regional sales manager
Jet Edge Inc., St. Michael, Minn., a manufacturer of ultrahigh-pressure waterjet and abrasivejet systems for precision cutting, coating removal, and surface preparation, has appointed Eric Magnuson as its north central regional sales manager.... Read more...

Product

April 15, 2008
Waterjet intensifier pump suitable for use in remote, mobile locations
The iP55-280DS diesel-powered waterjet intensifier pump from Jet Edge Inc.—suitable for use in remote and mobile locations in which electricity is scarce—is powered by a 280-HP Cummins turbo diesel engine that meets domestic and... Read more...

Article

February 12, 2008
Waterjet makes it into the mainstream
Abrasive waterjet cutting could be on the cusp of something big. For years metal fabricators viewed it as a niche machine, something to buy only when a part couldn't be cut any other way. But in many cases today it stands shoulder-to-shoulder... Read more...

News

December 11, 2007
Jet Edge appoints corporate sales manager
Jet Edge Inc., St. Michael, Minn., a manufacturer of ultrahigh-pressure waterjet and abrasivejet systems for precision cutting, coating removal, and surface preparation, has appointed Michael Metzig as corporate sales manager. Metzig is... Read more...

Article

December 11, 2007
Waterjet purchase becomes watershed moment
Allright Tool Co. is a woman-owned, family-operated machine shop in Birmingham, Ala. Founded by the Whittingtons in their basement in 1972, the shop began by taking on odd jobs for a large steel company. Over the next 30 years, the shop grew to... Read more...

Product

October 9, 2007
Waterjet cutting system has high-pressure intensifier pump, pneumatic drill
Jet Edge Inc. offers a high-rail-gantry, precision waterjet cutting system, an iP60-50 ultrahigh-pressure intensifier pump, and a self-feeding pneumatic drill. The waterjet system can produce complex parts out of nearly any material, the company... Read more...

News

October 9, 2007
Jet Edge partners with Saimo to sell waterjet systems in China, Australia
Jet Edge Inc., St. Michael, Minn., has announced a partnership with Saimo Group of Xuzhou, Jiangsu, China, to sell waterjet equipment in China and Australia. Saimo will manufacture waterjet systems based on Jet Edge's high rail gantry design,... Read more...

Article

September 11, 2007
Fabrication in transition
Which comes first—the purchase orders or the equipment investment? It's not quite the-chicken-or-the-egg question, but it's an interesting debate in the world of metal fabricating. Management at Arcadia Waterjet, Albany, N.Y., has asked... Read more...

News

August 7, 2007
Jet Edge announces Mexican distributor
Jet Edge Inc., St. Michael, Minn., has named Rosber S.A. de C.V. as its distributor for Mexico and Central America. Jet Edge manufactures ultrahigh-pressure waterjet and abrasivejet systems for cutting, coating removal, and surface preparation.... Read more...

News

July 10, 2007
Jet Edge appoints sales manager
Jet Edge Inc., St. Michael, Minn., has appointed Dirk Barrett as north central regional sales manager. Barrett is responsible for sales of the company's systems in Minnesota, western Iowa, northern Wisconsin, Michigan's Upper Peninsula,... Read more...

News

May 8, 2007
Jet Edge appoints marketing manager
Jet Edge Inc., St. Michael, Minn., a manufacturer of ultra-high pressure waterjet and abrasive jet systems, has promoted Nancy Lauseng to the newly created position of marketing manager, reporting to Tom MacGibbon, vice president of sales and... Read more...

News

October 10, 2006
Jet Edge names international sales engineer
Antoine Deproost has been named international sales engineer by Jet Edge Inc., St. Michael, Minn. Deproost is in charge of sales in Europe, South America, and the Middle East. He is also responsible for developing international distribution... Read more...