Kalamazoo Industries Inc. Showroom

Visit Kalamazoo Industries Inc.  

 

   Found 19 results for "Kalamazoo Industries Inc."...

      Just show me: Everything | Articles | News | Products

Product

June 20, 2014
Large-capacity abrasive saw engineered for large workpieces
The Kalamazoo Industries model K26E large-capacity abrasive saw is designed for foundries and other metalworking operations handling large workpieces. The machine offers options for almost any type of cut in workpieces up to 7-in. pipe, 5-in.... Read more...

Product

February 26, 2014
Back stand grinder delivers fast metal removal
The Kalamazoo Industries model BG14 back stand grinder is designed for foundries that need to grind such products as gates and risers rapidly. The heavy-duty machine features a 14- by 3-in. contact wheel, a 3- by 132-in. belt with a speed of... Read more...

Product

January 8, 2014
Multipurpose belt grinder made for small or short-run die casting facilities
The Kalamazoo Industries model S272V multipurpose belt grinder is designed for grinding, shaping, contouring, flat work, angles, snagging, and roughing in small or short-run die casting facilities. This makes it suitable for small, intricate... Read more...

Product

January 10, 2013
Collet fixture for chucks suitable for short runs
Kalamazoo Industries Inc.'s 1CC 5C collet fixture for chucks is suitable for short runs because it allows for quick setup of 5C collets without removal of the power chuck. The fixture is dead length for nonlateral movement of the workpiece... Read more...

Product

October 25, 2012
Floor-stand disc sander features cast-iron, steel construction
The Kalamazoo Industries model DS20 disc sander is a floor-stand unit designed for nonproduction applications. The sander features cast-iron and steel construction, a 20-in. steel disc, a tilt table with miter gauge, and a reversing drum... Read more...

Product

September 13, 2012
Compact wet benchtop sander features quick-change belt
The Kalamazoo Industries model S4SWB wet benchtop sander is designed for metallurgical laboratories and other applications requiring a compact sanding machine. The unit features a quick-change, 4- by 36-in. belt with preset belt tension;... Read more...

Product

June 28, 2012
Wet abrasive saw engineered for quality testing of foundry castings
The Kalamazoo Industries model K36 wet abrasive saw is designed for foundries that need to cut very large heat-treated castings for porosity inspection. The saw features a 50-HP motor driving a 36-in. abrasive wheel with an abrasive... Read more...

Product

January 9, 2012
Manual metallurgical saw features enclosed wet-cutting area with dual coolant nozzles
Kalamazoo Industries offers the model K12-14MS manual metallurgical saw. It features an enclosed wet-cutting area with dual coolant nozzles to eliminate the dispersion of abrasive particles into the workplace. The saw has a 14-in. abrasive... Read more...

Product

May 31, 2011
Wet benchtop saw measures 24 in. in all dimensions
Kalamazoo Industries' model K10WBT enclosed, wet cutting, benchtop abrasive saw offers manual operation. The 10-in.-dia. abrasive blade (not included) allows the machine to cut up to 1.5-in. solids and 2.5-in. pipe. The saw features a... Read more...

Product

January 17, 2011
Semiautomatic abrasive saw enclosed with outlet to contain cutting dust and abrasive particulate mater
The Kalamazoo Industries model K26E 26-in., semiautomatic abrasive saw is totally enclosed with a 6-in. outlet to contain the dust and abrasive particulate matter produced during cutting. The saw features a 26-in. wheel; an air-over-oil, 0-... Read more...

Product

October 11, 2010
Vibratory finisher designed for quite operation
Kalamazoo Industries' model KVF3 vibratory finisher is designed for deburring, polishing, and other finishing operations requiring the gentle vibrating action of rotating media. The unit features a 3.3-cu.-ft.-capacity steel tub with cast... Read more...

Product

May 3, 2010
High-speed miter saw designed for cutting aluminum, brass, other relatively soft nonferrous materials
The model KM10HS, a 10-in., high-speed miter saw from Kalamazoo Industries, is designed for cutting aluminum, brass, and other relatively soft nonferrous materials. The saw miters 45 degrees left, 60 degrees right, and has capacities of up to... Read more...

Product

March 5, 2010
Wet benchtop saw cuts up to 1.5-in. solids, 2.2-in pipe
Kalamazoo Industries offers the model K10WBT enclosed wet cutting benchtop abrasive saw. The manual saw has a capacity of up to 1.5-in. solids and 2.2-in. pipe. The saw features a magnetic switch; an internal work light; dual 3-in. vises; dual... Read more...

Product

September 16, 2008
Manual metallurgical saw features enclosed, dual-coolant-nozzle wet cutting area
The model K12-14MS manual metallurgical saw from Kalamazoo Industries features an enclosed wet cutting area with dual coolant nozzles to contain abrasive particles. The saw has a 14-in. abrasive wheel; a 5-HP, three-phase, 1,725-RPM TEFC motor;... Read more...

Product

April 15, 2008
Foundry saw features simplified access
The Kalamazoo Industries model K20FS lock-down-head saw is designed for cutting foundry gates and risers and has a stepped-in design on the front to simplify access. The saw features a 20-in. abrasive wheel; a 2,500-RPM, 1-in. spindle with... Read more...

Product

January 15, 2008
Abrasive saw designed for structural steel, wide parts
Kalamazoo Industries has introduced the model K20RS 20-in. abrasive wheel saw designed to cut structural steel and wide parts. The saw can be operated chop style for cutoff or radial style for long parts. The saw head moves lengthwise for wide... Read more...

Product

December 12, 2006
Double-head miter saw has 14-in. wheels
The KDM14 double-head miter saw from Kalamazoo Industries features two heads, one fixed and one movable, with14-in. abrasive wheels. Both heads miter 45 degrees left or right. Additional features include a 1-in. spindle arbor operating at 4,400... Read more...

Product

October 10, 2006
Abrasive mitering saw designed for high-capacity cutting
Kalamazoo Industries Inc. has introduced the KM20-22V abrasive mitering saw for high-capacity cutting. The saw accepts solid stock up to 4 in. and most shapes up to 6 in. when cutting at 90 degrees. When mitering at 45 degrees either to the left... Read more...

Product

June 13, 2006
Abrasive mitering saw has 26-in. blade
Kalamazoo Industries has introduced the KM26D abrasive mitering saw. The saw has a 26-in. blade with a capacity up to 9 in. at 90 degrees and up to 4 in. for solids and 6 in. for shapes at 45 degrees (right miter only). Standard features... Read more...