Kennametal Inc. Showroom

Visit Kennametal Inc.  

 

   Found 30 results for "Kennametal Inc."...

      Just show me: Everything | Articles | News | Products

News

April 17, 2014
Kennametal raises $1 million for United Way
Kennametal Inc., Latrobe, Pa., has announced that it raised $1 million in support of the United Way and its agencies during the 2013 campaign. Kennametal Chairman, President, and CEO Carlos Cardoso accepted the first Live United Award given... Read more...

News

March 21, 2014
Kennametal, Timken named to list of World’s Most Ethical Companies
Kennametal Inc., Latrobe, Pa., and The Timken Co., Canton, Ohio, have been named to Ethisphere® Institute's World's Most Ethical Companies™ list. This is the third year in a row that Kennametal has received the honor, and the fourth time for... Read more...

Product

March 19, 2014
Carbide drill designed for aluminum machining
Kennametal offers the HPS solid-carbide drill, made from Beyond™ KN15™ grade fine-grain carbide, for holemaking in aluminum. The drill’s highly polished surface reduces friction on flutes, margins, and cutting edges for good chip... Read more...

Product

March 6, 2014
Turning insert’s chip step is designed in continuous curve
Beyond™ MR (medium roughing) inserts from Kennametal are designed for turning stainless steel with smooth cutting action and high wear resistance. The chip step is designed in a continuous curve so that alternating stresses are... Read more...

Product

February 26, 2014
Stack drill made for aerospace composite/titanium stacks
A new stack drill from Kennametal for aerospace composite/titanium stacks can operate with or without through-coolant for chip evacuation. The B55_DAL drill handles CFRP-metal stacks in hole diameters from 0.1875 to 0.625 in. The drill can... Read more...

Product

February 25, 2014
Solid-carbide drill designed for aluminum workpieces
Kennametal’s new HPS solid-carbide drill features Beyond™ KN15™ grade fine-grain carbide and unique point geometry for holemaking in aluminum. Its highly polished surface helps reduce friction on flutes, margins, and cutting edges.... Read more...

Product

February 25, 2014
Face milling platform features eight cutting edges
With eight cutting edges, Kennametal’s new KSSM8+™ face milling platform cuts cast-iron and steel workpieces. The IC10 size provides a 0.354-in. depth of cut, while the IC 12.7 achieves a 0.236-in. depth of cut. Both have high lead angles... Read more...

Product

October 3, 2013
Insert's clamp design reduces vibrations
Kennametal has introduced Beyond Shield™ inserts. They combine a clamping system with new superhard PCBN grades for machining of cast iron. The clamping system allows smaller inserts to perform in the same applications as larger inserts.... Read more...

Product

September 25, 2013
Face mill features double-sided insert with four cutting edges

Product

September 24, 2013
Spindle connection helps maximize metal removal in titanium, hard alloys
Kennametal's KM4X100™ spindle connection combines high clamping force and optimized interference levels to provide a strong connection, high stiffness, and high bending load capacity for machining such materials as titanium alloys, INCONEL®... Read more...

Product

September 24, 2013
App assists with tool selection, configuration
Kennametal has launched NOVO™ app to assist with tool selection and configuration based on the user's part and process requirements. CAD models, complete assembly lists, and automated job report functionality are included. According... Read more...

Product

May 19, 2013
Ceramic end mills machine nickel-based, high-temp alloys
Kennametal has introduced Beyond KYS40™ solid ceramic end mills, designed to machine high-strength, nickel-based alloys. The SiAlON ceramic grade offers high heat resistance and strong cutting edges (negative rake). The end mills provide... Read more...

Product

April 11, 2013
Demo tool management system introduced
Kennametal Inc. has expanded its ToolBOSS™ tool management system. The new Flex Unit is a smaller, portable demo unit that the manufacturer is making available to its distribution channel partners. At 100 lbs., the demo unit includes... Read more...

Product

April 3, 2013
Surface treatments add wear resistance to complex components
UltraFlex™ wear-resistant surface treatments from Kennametal are designed for components with complex geometries in the power-generation and oil and gas industries. The treatments provide metallurgical-bonded, void-free cladding for critical... Read more...

Product

February 7, 2013
Milling cutters designed to deliver reduced cutting force on titanium
The KSRM™ line of milling cutters from Kennametal are engineered for titanium and stainless steel applications. Their design enables pocketing, profiling, ramping, and plunging with up to 0.04 in. f z . The inserts offer up to eight... Read more...

Product

December 13, 2012
Drills systems offered
Kennametal offers a variety of holemaking products. The GOdrill™ microdrill works with multiple applications and materials. It handles diameters starting at 0.0394 in. The YPC Beyond™ drill, a solid-carbide drill platform, is engineered... Read more...

Product

December 13, 2012
Indexable milling inserts feature 12 cutting edges
Kennametal has introduced the new Rodeka™ series of inserts for indexable milling. The double-sided inserts feature 12 cutting edges. An antirotation feature helps provide stability for higher feed rates and cutting forces with an insert... Read more...

Product

November 1, 2012
Shoulder mill made for small diameters
Kennametal offers the Mill 1-7™ cutter for finishing in small-diameter milling. The cutter can be used for shoulder, ramp, slot, plunge, and helical milling while using a single insert. The small insert enables the use of high-density... Read more...

News

November 2, 2011
Kennametal named among America's safest companies
Latrobe, Pa.-based Kennametal Inc. has announced that it has been named one of America's Safest Companies by EHS Today , an environment, health, and safety industry publication. Kennametal was selected among America's Safest Companies for its... Read more...

News

March 8, 2011
Kennametal raises more than half-million dollars for United Way
Latrobe, Pa.-based Kennametal Inc. has announced that it raised more than $570,000 in support of the United Way and its agencies during the company's 2010 United Way Campaign. Of the total, $328,488 was pledged by more than 900 employees... Read more...

News

June 1, 2009
Kennametal receives eighth Carnegie Science Center Award
Kennametal Inc., Latrobe, Pa., announced today that two of its inventors were honored with the Advanced Manufacturing Award at the 13th Annual Carnegie Science Center Awards. This is the eighth time that Kennametal has been recognized for... Read more...

News

May 19, 2009
Kennametal to sell high-speed steel drills, related product lines to Top Eastern Drill
Kennametal Inc. announced today that it has signed a definitive agreement to sell its high speed steel drills, related product lines, and assets to Top Eastern Drill Co., Ltd. (TDC). This sale is in alignment with Kennametal's strategy to shape... Read more...

News

January 13, 2009
Kennametal to cut 1,200 jobs
Latrobe, Pa.-based Kennametal, which said that demand for its tools and advanced materials have been hurt by customers' actions to keep inventories low, has announced that it is cutting more than 1,000 jobs. The company earlier had planned to... Read more...

News

June 1, 2007
Kennametal president, CEO named best CEO
Kennametal Inc., LaTrobe, Pa., has announced that President and CEO Carlos Cardoso has been named one of the best CEOs by Institutional Investor magazine. This recognition places Cardoso among the top five CEOs in the capital goods/industrials... Read more...

News

November 28, 2006
Kennametal honors environmental health, safety excellence
Kennametal Inc., a global supplier of tooling, engineered components, and materials consumed in production processes, has presented its fifth annual Environmental Health and Safety (EHS) Excellence Awards to six Kennametal projects worldwide. The... Read more...

News

March 16, 2006
Kennametal announces divestiture of J&L business unit
Kennametal Inc., a tooling, engineered components, and advanced materials supplier, announced today that it has signed a definitive agreement with MSC Industrial Direct Co., Inc. to sell its J&L Industrial Supply business for $349.5 million. The... Read more...

News

April 27, 2005
Kennametal elects Caterpillar exec to board
Kennametal Inc. announced today that it has elected Steven H. Wunning, group president and executive office member of Caterpillar Inc., to its board of directors. Wunning will join the board in July 2005. Wunning began his career at Caterpillar... Read more...

News

March 22, 2005
Kennametal names CFO
Kennametal Inc. today announced that Cathy R. Smith will join the firm as executive vice president and CFO effective April 11, 2005. Smith will oversee the company's finance, treasury, accounting, M & A, and investor relations functions. Smith... Read more...

News

March 16, 2005
Kennametal breaks ground for China facility
Kennametal Inc. broke ground on Tuesday, March 15 for the company's new Chinese manufacturing plant. Located in the Tianjin Economic Development Area (TEDA), the facility, initially sized at 15,000 square meters, will employ some 200 people in... Read more...

News

March 1, 2005
Kennametal completes Extrude Hone acquisition
Kennametal Inc. has completed its Extrude Hone Corp. acquisition for approximately $137 million, net of acquired cash and estimated direct acquisition costs. Located in Irwin Pa., Extrude Hone has manufacturing locations in the U.S., Germany, and... Read more...