Messer Cutting Systems Inc. Showroom

Visit Messer Cutting Systems Inc.  

 

   Found 30 results for "Messer Cutting Systems Inc."...

      Just show me: Everything | Articles | News | Products

News

June 10, 2014
Messer Cutting Systems appoints president/CEO
Thermal cutting gantry machine manufacturer Messer Cutting Systems Inc., Menomonee Falls, Wis., has appointed Bill Heller as president and CEO, effective September 2014. He replaces Gary Norville, acting president and CEO, who will retire in... Read more...

Product

March 27, 2014
Water table performs plasma cutting, dry cutting
Messer Cutting Systems Inc. has introduced the compact EdgeMax L-series water table, which features a unitized steel water table/frame, full-capture bearing assemblies, and a low-mass aluminum beam. Driven by dual brushless AC motors, the... Read more...

Product

April 23, 2013
Dual-beam design gives gantry cutting machine strength, narrow footprint
Messer Cutting Systems has introduced the TMC4500 DB heavy-duty gantry cutting machine. Its dual box-beam construction is supported by 10-ft. end trucks for stability and to support the company's largest cutting tools for precision beveling and... Read more...

News

July 1, 2009
Messer hires technical products sales manager
Messer Cutting Systems Inc., a manufacturer of thermal cutting gantry machines, has hired Bell Heller as technical products sales manager. Heller, who has a background in robotic automation sales, has 32 years' experience in the cutting and... Read more...

News

June 9, 2009
Company announces name change
MG Systems & Welding, Inc. headquartered in Menomonee Falls, Wis., a manufacturer of thermal machining centers, mainly plasma and oxyfuel, has officially changed its name to Messer Cutting Systems, Inc. The decision was made on a corporate level... Read more...

Article

February 10, 2009
'We are all Shickels'
"There are a lot of new faces around here. I don't think I know some of these people's names," said Mark Shickel, vice president, engineering, Shickel Corp., as the company's approximately 100 employees gathered for a picture. It's not... Read more...

Article

July 15, 2008
Making sense of metal cutting technologies
It's the question heard 'round the metal fabricating world: What metal cutting technology makes the most sense? Unfortunately, the answer to the question cannot be covered in one simple statement. The answer depends on the metal being cut,... Read more...

Article

March 11, 2008
Service center fabricates its future
These are interesting times in which metal service centers find themselves. Many are finding that they have to offer some level of fabricating services to help them stand out among other metal distributors. They have seen dramatic consolidation... Read more...

News

February 12, 2008
MG Systems & Welding expands
MG Systems & Welding Inc., Menomonee Falls, Wis., a manufacturer of thermal cutting machines, has expanded its facilities for the second time in a year. The first addition, completed last summer, increased office space. The new project will add... Read more...

News

September 11, 2007
MG Systems and Welding announces vice president, marketing
MG Systems and Welding Inc., Menomonee Falls, Wis., a manufacturer of thermal cutting machines, has promoted Ronald Schneider to vice president of marketing. He is responsible for all of the company's marketing, product management, and field... Read more...

News

June 12, 2007
MG breaks ground on new addition
MG Systems & Welding Inc., Menomonee Falls, Wis., has begun construction of a two-floor addition to the area for its service and accounting departments, adding 4,334 sq. ft. of total space. The company plans to move accounting to the first floor,... Read more...

News

April 16, 2007
MG Systems & Welding appoints president, CEO
MG Systems & Welding Inc., Menomonee Falls, Wis., has appointed Gary Norville as president and CEO. Norville has more than 34 years' experience in the cutting, welding, and gas industries. With more than 24 years of service with MG Systems &... Read more...

Product

March 13, 2007
Plasma lifter has magnetic collision sensor
MG Systems and Welding has introduced the OL200s plasma lifter. The lifter features smooth drive motion and contact-sense initial height sensing to set the pierce height precisely. A small limit switch provides a secondary method of detecting... Read more...

Article

February 13, 2007
Big shoulders, long strides
About 25 miles inland from the Pacific Ocean in Santa Fe Springs, Calif., Hansen Steel Services employees wear T-shirts imprinted with the company's Viking logo—a reference to the owners' Norwegian ancestry. It's not hard to imagine... Read more...

Product

December 12, 2006
Video camera aligns, monitors cutting process
MG Systems and Welding has introduced a video camera feature that can be used as an alignment tool and monitor the cutting process. The camera, offered as an option for the company's TMC4500ST, MPC2000, Titan II, and MetalMaster Plus plasma and... Read more...

Product

June 13, 2006
Oxyfuel lifter provides 150-IPM vertical speed
The OL200 oxyfuel lifter from MG Systems and Welding is suitable for use with the ALFA oxyfuel torch and provides 150-IPM vertical speed. The lifter provides increased part accuracy as a result of accurate height sensing through integration with... Read more...

News

April 11, 2006
MG Systems and Welding hires national sales manager
MG Systems and Welding Inc., Menomonee Falls, Wis., has announced the hiring of Scott Kessler as national sales manager. Kessler is involved in activities that help the company's regional sales managers and dealers provide better products and... Read more...

News

March 9, 2006
MG Systems & Welding to be featured on History Channel
MG Systems & Welding is being featured on The History Channel's 'Super Tools' series as part of a show about the Newport News Shipyard, which uses the company's TMC4500ST for providing beveled plates used in ship fabricating. The program focuses... Read more...

Product

February 7, 2006
Cutting software upgraded
MG Systems and Welding has introduced the version 3.0 of its Global Control software. The new version includes a Job List feature that allows users to load several part programs into memory, assign unique cut parameters to each program, and set a... Read more...

Product

January 10, 2006
Plasma bevel unit cuts up to 400 amps
The Global Rotator Δ contour plasma bevel unit from MG Systems and Welding provides the option of bevel cutting up to 400 amps for users in the mid-size to large gantry machine market. The rotator has a compound-skew design that keeps the... Read more...

Product

August 9, 2005
Oxyfuel torch features automated height sensing, ignition
The ALFA oxyfuel torch from MG Systems and Welding has completely integrated height sensing and internal auto-ignition, eliminating external parts that can become coated in slag or become damaged by tip ups or other working hazards. Able to... Read more...

Product

July 12, 2005
System protects plasma torches from collision
MG Systems and Welding’s SureStop magnetic torch collision sensor system is designed to hold plasma torches rigidly in place and protect them from collision damage that results from programming errors, obstructions on the cutting table,... Read more...

Article

May 10, 2005
Making a clear-cut decision
Read any metalworking trade magazine and you routinely will see introductions of new cutting machinery. You'll also see machines advertised and the tradeshows that will feature them. As the owner of a small or medium-size shop, how do you... Read more...

Product

April 12, 2005
Plasma/oxyfuel cutting machine has 1,000-IPM jog speed
MG Systems and Welding's EdgeMaster dual side drive plasma and oxyfuel cutting machine travels at a jog speed of 1,000 IPM. Available in widths from 8 ft. to 12 ft. and lengths from 10 ft. to 80 ft., the machine can cut stainless steel, mild... Read more...

Product

February 8, 2005
Gas control system enhances oxyfuel cutting
MG Systems and Welding has introduced the Omniflow automatic gas control system designed to provide consistent oxyfuel cutting performance. The operator selects the material thickness on the control screen, and the system automatically sets the... Read more...

Product

November 9, 2004
Cutting machine CNC introduced
Messer MG Systems and Welding has introduced the Global Control, a professional-grade Microsoft.NET CNC for its cutting machines. The control features a simple operator interface with a 15-in. touchscreen. Fully network and Internet compatible,... Read more...

Article

July 13, 2004
Pushing plate processing productivity
An infinite-rotation compound-skew-axis manipulator with a plasma torch allows automated contour bevel cutting of mild steel, stainless steel, and aluminum. Maximizing productivity. Making more with less. You hear about it almost every... Read more...

Article

June 8, 2004
Plasma pleases plenty
In case you missed it, check out this excerpt from the article "National research programs explore plate welding for shipbuilding" in the March 2004 issue of The FABRICATOR®: One project objective is to introduce laser cutting... Read more...

Article

January 16, 2003
Investigating applications, hardware, collision protection, and height control
Thermal cutting processes that can produce beveled edges are not new. In fact, they probably have been around nearly as long as oxyfuel cutting. Their use has been popular in the shipbuilding industry for many years. However, until... Read more...