SafanDarley delivers servo-electronic press brake to Harris Fabrication
Netherlands-based SafanDarley, with a U.S. plant in Annapolis Junction, Md., has sold an E-Brake 200T servo-electronic press brake to Harris Fabrication, Topeka, Kan.
According to the press brake manufacturer, cycle times on the machine are far shorter than on conventional press brakes because of the active safety light guard system and the acceleration of the servomotors. In addition, the servo-electronic technology distributes forces evenly through a roller drive system in the upper beam. The machine uses energy only when the top beam is moving.
The press brake is equipped with E-Control EC20 software to facilitate numeric and 2-D graphical programming. Operators can draw a complete product using the touchscreen and then automatically generate a bending program.
.subscribe now
The Fabricator is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The Fabricator has served the industry since 1970.
start your free subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
Seth Feldman of Iowa-based Wertzbaugher Services joins The Fabricator Podcast to offer his take as a Gen Zer...
