Contributing Writer
- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Arc Welding 101: Electrodes and machine settings
- By Marty Rice
- November 13, 2014
- Article
- Arc Welding
Q: I know how to arc weld. I took arc welding classes in high school and was certified in the state of California. Unfortunately, they never taught me about the settings and what electrodes were best for what jobs.
For example, I’m rebuilding a motorcycle and I want to straighten a minor bend in the frame and reinforce it with perhaps some plate steel and a solid weld. What should I set the arc welding machine to, and what size electrode should I use for a solid weld that won’t burn holes through the frame?
Basically, I am in the dark about the electrodes and machine settings. Is there a guide that I can print, or is there some standard advice you can give me? Also, is there a universal electrode and setting that would be good for just about any standard job, such as the one I mentioned, where a solid weld needs to handle a load?
Mark E.
A: Ideally, gas metal arc welding (GMAW) would be great for working on your motorcycle frame because it concentrates the heat. The heat-affected zone (HAZ) is much greater with shielded metal arc welding (SMAW) and much more concentrated with GMAW. On a frame, you want as little heat as possible.
If you can’t gas metal arc weld it, then I would suggest using a small-diameter electrode, such as 0.09375-in. diameter. Electrodes like 6010 or 6011 would be good because of their fast-freezing characteristic. In other words, the weld pool goes from liquid to solid quickly, so it won’t heat it up as much as, for example, a 7018 drag rod would.
The first two numbers (60) mean 60,000 pounds per square inch of tensile strength (the ability to resist being pulled apart). That is plenty for your frame.
Generally, if I’m burning 0.125-in. rods, I use about 120 amps on 7018 and about 85 amps on 6010/6011. Every machine varies, so this is general advice. Also, the thickness and type of metal also play important roles. I’d use 0.09375-in.-dia. 6010 or 6011 rods if your frame is mild steel. They’re easier to control the weld pool with and will generate less heat than 0.125-in.-dia. rods. Try them at around 70 amps and then go up or down as needed.
Charts are available that give manufacturer-recommended settings. I generally don’t even go by the numbers. I set the machine by running a practice bead until I get the weld pool just right. If I get excessive spatter, it’s too hot, especially if it won’t chip off. If your bead is bulky and not tied-in well, it’s too cold. The bead should be smooth and uniform.
About the Author
Marty Rice
High School Career Center in Texas
Questions for the author can be e-mailed to vickib@thefabricator.com
About the Publication
subscribe now
The Welder, formerly known as Practical Welding Today, is a showcase of the real people who make the products we use and work with every day. This magazine has served the welding community in North America well for more than 20 years.
start your free subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 05/14/2024
- Running Time:
- 62:12
Cameron Adams of Laser Precision, a contract metal fabricator in the Chicago area, joins the podcast to talk...
- Trending Articles
Building a successful welding program from the ground up
Welding power source’s modes designed to help optimize performance
Connecticut students compete in Maritime Welding Competition
Torch made for welding thin, conductive sheet metal
Welding jacket designed for protection, comfort
- Industry Events
Laser Welding Certificate Course
- May 7 - August 6, 2024
- Farmington Hills, IL
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI
Precision Press Brake Certificate Course
- July 31 - August 1, 2024
- Elgin,